PRODUCT DATA SHEET
(Previous date 01.09.2009)'
Feelings Ceiling Paint
|DESCRIPTION||Acrylate paint with excellent hiding power for interior use.|
Plaster, concrete, filler treated, brick, cardboard, chipboard, plaster board and wood fibre board surfaces according to directions for use. Also suitable for repainting of previously painted surfaces.
|RECOMMENDED USES||For interior walls and ceilings.|
|Colour Range||White. Shades marked with A from Tikkurila Symphony colour card. Half of the colourant amount shown in the tinting formula is used in tinting. Shades may differ slightly from the colour samples. Check the shade when using Feelings Ceiling Paint as a top coat.|
|Building material emission class||M1|
Non-absorbent surfaces 7-10 m2/l.
Absorbent surfaces 3-7 m2/l.
The above should be used as a guide, as actual spreading rates will depend upon many factors including texture, porosity and application method.
|Can sizes||2.7 l and 9 l|
Roller, brush or spray.
- nozzle 0,017" - 0,021"
- thinning 0-10 vol.-%
|Drying time at 23°C and 50% relative air humidity||Normally touch-dry after ½ hour and recoatable after 1-2 hours.|
|Wash resistance||Withstands wiping with a damp cleaning cloth.|
|Heat resistance||+85 °C, ISO 4211-3.|
|Solids volume||Approx. 35% depending on shade.|
|Density||Approx. 1.5 kg/l, ISO 2811|
|Storage||Protect from frost.|
|Application conditions||All surfaces must be dry, the temperature of the air at least +5 °C and the relative humidity of the air below 80%.|
Remove all dirt and dust from new surfaces. Smooth the surfaces with a suitable Presto filler and sand the dried surface. Paint with Feelings Ceiling Paint.
Previously painted surfaces:
Wash down previously painted surfaces with diluted Maalipesu cleaning agent and rinse carefully with water. Sand hard or glossy surfaces matt and remove sanding dust. Fill holes and cracks with a suitable Presto filler and sand the dried surface. Paint with Feelings Ceiling Paint.
|Painting||Stir Feelings Ceiling Paint well before use and thin with water, if necessary. Apply one or two coats with a roller, brush or spray.|
|Cleaning of tools||Remove excess paint from tools and clean with water. Tikkurila Pensselipesu (Tool Cleaner) is recommended to be used for cleaning hardened paint.|
|Maintenance instructions||Cleaning earliest abt. 1 month after application of the finish.
The surfaces are cleaned with a well squeezed damp sponge or cleaning cloth and neutral (pH 6 – 8) washing detergent. Dilution instructions given by the detergent producer have to be followed by preparing the washing dilution. The surface must be dried after the cleaning.
The product achieves its final hardness and durability after one month under normal conditions, therefore the surfaces must be handled with care during this time. If the surfaces need to be cleaned soon after finishing, clean them lightly with a damp cleaning cloth.
|Maintenance treatment||Surfaces painted with Feelings Ceiling Paint can be recoated with the same or same kind of waterborne paint. See Pretreatment.|
|EU VOC 2004/42/EC-limit value||(cat A/a) 30g/l(2010)|
HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
|Not classified as hazardous to health. Handle with care, avoid prolonged contact with skin and breathing of spray mist. A Safety Data Sheet is available on request. Safety Data Sheet - Feelings Ceiling Paint|
|ENVIRONMENTAL and WASTE DISPOSAL||Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.|
|sre030913 / mpy251005 / ome040604 / 723-s|