Tikkurila worldwide

Helmi Furniture Filler - New Product

DESCRIPTION Water-borne special furniture filler.
PRODUCT FEATURES For filling small holes prior to finishing painting, for new as well as previously painted surfaces. Filling capacity 3 mm.
RECOMMENDED USES Fixtures, furniture, doors, windows and other dry interior wood surfaces.

  The paint is water-borne
Colour Range White
Can sizes 200 ml
Thinner Water
Application method

Application by trowel

Drying time at 23°C and 50% relative air humidity Thin filling layer (1 mm) can be sanded after approx. 1 hour. Drying time depends on layer thickness, relative humidity of the air and temperature. 
Filling capacity Max. 3 mm
Solids volume 74 %.
Density 1.7 kg/l, ISO 2811
Storage Protect from frost. Store in dry and cool place, protected from sunlight.

Application conditions The surface to be treated must be dry, the temperature of the air at least +10ºC, and the relative humidity of the air below 80 %.
Preparation Unpainted surface:
Clean the surface from dirt. Dust off and remove loose particles. Apply Presto Furniture Filler with a trowel.

Previously painted surface:
Clean previously painted surfaces with Kalustepesu cleaning agent. After the surface has dried, remove flaking paint and sand the paint surfaces until matt. Remove sanding dust.
Smoothing Apply Helmi Furniture Filler with a smoothing trowel. Apply on bigger holes rather two or three times. Sand the surface and remove sanding dust. Finishing painting can be done with a water-borne or alkyd paint.
Cleaning of tools Clean tools with water.

according to Regulation (EC) No. 1272/2008
The product is not classified as dangerous. Contains 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction. Wear protective gloves. A Material Safety Data Sheet is available on request.

ENVIRONMENTAL and WASTE DISPOSAL Recycle empty, dry cans or dispose them of in accordance with local regulations.
TRANSPORT not classified