Tikkurila worldwide
(Previous date 13.03.2015)'


DESCRIPTION Waterborne special paint for interior use.
PRODUCT FEATURES Suitable for use in dry interior surfaces.
Magnetic can be finished 1-2 times with Tikkurila waterborne interior finishing paint for walls, if another color is preferred on the surface than gray. Thick topcoat layers reduce the adhesion of magnets.
RECOMMENDED USES Concrete, plasterboard, chipboard and filler-treated surfaces.

  The paint is suitable for interior walls The paint is matt Tool: roller Tool: brush Painting conditions: relative humidity of the air below 80% and the temperature of the air at least +5ºC
The coverage of the paint on rough surfaces
The coverage of the paint on smooth surfaces
Colour Range Gray
Gloss grade Matt

approx.  1.5 m²/l when applied three times.

Can sizes 0.5 l, 3 l
Mixing ratio Not to be thinned
Application method Roller or brush
Drying time at 23°C and 50% relative air humidity

approx. 24 hours

Density Approx. 2.60 kg/l, ISO 2811
Storage Protect from frost
Product code 001_5800

Application conditions The surface to be painted must be dry and the temperature at least +10 °C. The temperature of the air must be at least +5 °C and the relative humidity of the air below 80 %.
Preparation Unpainted surfaces:
Clean dust, dirt and loose material from the surface. Fill holes and cracks with a suitable Presto filler, if necessary. Prime unpainted surfaces with e.g. Varma Primer.
Previously painted surfaces:
Wash down previously painted surfaces with diluted Cleaning Agent (Maalipesu) and rinse carefully with water. Sand glossy surfaces matt with sandpaper to assure best possible adhesion. Remove sanding dust.
Painting Before use stir Magnetic until smooth (even several minutes) and occasionally during use. Paint 3 times using plenty of Magnetic paint and short-napped roller or brush. Aim to as smooth surface as possible. Magnets stick best to smooth substrate. You can also apply Magnetic with a roller and smooth it immediately with a steel trowel to achieve a very smooth surface. Let the painted surface dry 24 hours between the coats. Use approx. one litre of paint for approx. 1.5 m² surface in three coats. This amount will guarantee the magnetic effect. If wanted, finishing can be done after 24 hours with Tikkurila's waterborne interior paint.
Cleaning of tools Remove excess paint and clean the tools with water. Washbowl has to be washed carefully, because the iron that the paint contains can dye.
Maintenance instructions Earliest after 1 month from painting.
Clean the surfaces rather as dry cleaning using vacuum cleaner, smooth brush or duster. Using damp cleaning cloth can leave a trace on the surface. After the finishing the surface should be treated carefully for a couple of weeks, because the paint attains its final hardness and durability in normal conditions after abt. 1 month. If the surfaces have to be cleaned soon after the finishing, clean the surface rather as dry cleaning using a vacuum cleaner, smooth brush or duster.
EU VOC 2004/42/EC-limit value (cat A/i) 140g/l(2010)
Magnetic contains VOC max. 140 g/l.

according to Regulation (EC) No. 1272/2008
Not classified as hazardous for health. Handle with care and avoid unnecessary exposure. Safety Data Sheet is available at request. Safety data sheet

ENVIRONMENTAL and WASTE DISPOSAL Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations for hazardous waste.
ser201216 / joa100112 / keh270504 / mkv24102016 / 0015800