PRODUCT DATA SHEET
(Previous date 17.01.2011)'
Paneelikatto Valkoinen - Panel White
|DESCRIPTION||Water-borne opaque acrylate paint.|
|PRODUCT FEATURES||Water-borne opaque acrylate paint for new and old panel ceilings in dry interiors. Also suitable for repainting of previously painted and lacquered panel ceilings.|
|RECOMMENDED USES||For ceilings and walls in dry interior premises.|
|Building material emission class||M1|
|Can sizes||3 l and 10 l|
|Drying time at 23°C and 50% relative air humidity||Touch-dry after one hour. Recoatable after 2 hours.
|Solids volume||36 %|
|Density||1.3 kg/l, ISO 2811|
|Storage||Protect from frost.|
|Application conditions||The surface to be treated must be dry, the temperature of the air at least +8ºC, and the relative humidity of the air below 80 % . Low temperature (about +15ºC) and high humidity (50-70 %) extend the open-time of the paint and facilitate the painting work.|
|Preparation||Remove all dirt and dust from new surfaces to ensure the best possible adhesion. Treat knotty and darkened panels with Multistop Sealing Primer 1-2 times.
Wash down previously painted or lacquered surfaces with Tikkurila MAALIPESU Cleaning Agent according to the instructions on the label. Allow to dry. Remove loose paint or lacquer with a scraper and sand the whole surface. Remove sanding dust. Fill holes and cracks with Presto Rapid Filler and sand filled places. Remove sanding dust.
|Painting||Stir the paint carefully before use. Use the paint without thinning. Apply two coats with a synthetic-fibre brush, use paint liberally. Paint new panels first separately before installation, apply thin coats on joints.|
|Cleaning of tools||Remove excess paint from tools and wash them with water. Tikkurila Pensselipesu (Tool Cleaner) is recommended to be used for cleaning hardened paint from tools.|
|Maintenance instructions||Handle the surface with care, ultimate durability and hardness is reached in approx. one month under normal circumstances. Avoid cleansing approx. 1 month after the painting work. If needed, clean the surface with a neutral (pH 6-8) dishwashing agent and a soft brush, sponge or a cleaning cloth.
Very dirty surfaces can be cleansed with a cleaning tool, washing mop or sponge using a weakly alkaline (pH 8-10) detergent. Rinse surface carefully after maintenance.
|EU VOC 2004/42/EC-limit value||(cat A/d) 130g/l(2010)|
HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
|The product is not classified as dangerous. A Safety Data Sheet is available on request.Safety Data Sheet - Panel Ceiling White|
|ENVIRONMENTAL and WASTE DISPOSAL||Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.|
|ser160516 / hok110706 / akk090606 / mkv17012011 / 0065680|