Tikkurila worldwide
(Previous date 19.12.2015)'

ClimateCooler Flex Topcoat

DESCRIPTION Flexible heat reflecting water-borne modified acrylate paint.

Painting of roofs. To be used as a system with ClimateCooler Flex Primer.

RECOMMENDED USES Bitumen and fiber-cement sheets. Note! Can also be applied on flat roofs without ponding water.

  The paint is suitable for roofs The paint is matt The paint is water-borne Tool: roller Tool: spray Tool: brush
The coverage of the paint on rough surfaces
The coverage of the paint on smooth surfaces
Features Solar reflectance: Reflects up to 80 % of infrared radiation depending on color. The best heat reflectance result will be achieved together with ClimateCooler Flex Primer.
Colour Range Black, light grey, dark brown, tile red, white and anthracite dark.
Gloss grade Matt

4-6 m2/l applied twice, depending on substrate.

Can sizes 20 l
Thinner Water
Application method Brush, roller or spray (airless). High pressure spray nozzle 0,019" - 0,021" (nominal angle 40°- 50°).
Drying time at 23°C and 50% relative air humidity Withstands rain and dew 1-2 hours after application. Drying will be slower with higher relative humidity of the air and at lower temperatures. A second coat can be applied earliest 3-4 hours after the first coat.
Wear resistance Good also in industrial and marine climate.
Solids volume approx. 39 %.
Density approx. 1.4 kg/l, ISO 2811.
Storage Protect from frost.

Application conditions The surface to be painted must be solid and dry, air temperature at least +8 C and relative humidity of the air below 80 %. Schedule the painting work so that the paint film will be dry before the evening dew. Do not paint under the risk of rain.
Preparation Clean the surfaces from dirt, dust, moss and lichen. Use high pressure washer, avoiding damaging the substrate and structures. Apply ClimateCooler Cleaner solution according to instructions if needed.
Applicable national health and safety precautions must be followed in the treatment of substrates containing asbestos.

Priming Use ClimateCooler Flex Primer.
Finishing Mix the paint carefully before use.

Apply one or two coats of ClimateCooler Flex Topcoat, total wet film thickness 170-180 µm.

Note! Check the condition of the roof before starting the work.
The product contains film protecting agents, therefore rainwater flowing from the roof is not recommended to be used for watering plants or washing during the first year from painting.
Cleaning of tools Clean tools with water. Slightly hardened tools can be cleaned with Pensselipesu Tool Cleaner.
Maintenance instructions Handle the painted surface with care. The surface achieves its final hardness and durability within approx. 4 weeks.
Earliest after 1 month from application the surface can be cleaned with ClimateCooler Cleaner (mixing ratio 1 part of cleaner in 50 parts of water).
Maintenance treatment Surfaces painted with ClimateCooler Flex Topcoat should be maintenance painted with the same system.
EU VOC 2004/42/EC-limit value (cat A/i) 140g/l (2010)
ClimateCooler Flex Topcoat contains VOC max. 140g/l.

according to Regulation (EC) No. 1272/2008
Harmful to aquatic life with long lasting effects. Contains reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H-isothiazol-3-one [EC no. 220-239-6] (3:1) and 2-octyl-2H-isothiazol-3-one. May produce an allergic reaction. Wear protective gloves. Avoid release to the environment. A Safety Data Sheet is available on request. CLIMATECOOLER_FLEX_TOPCOAT_EN

ENVIRONMENTAL and WASTE DISPOSAL Avoid spillage into drains, water systems and soil. Recycle empty, dry cans or dispose them of in accordance with local regulations. Destroy liquid waste according to the local regulations for hazardous waste.
TRANSPORT Not classified.