Tikkurila worldwide
(Previous date 02.12.2014)'

KILPI Huopakattomaali - Paint for Bitumen Roofs

Kilpi Huopakattomaali[1]
DESCRIPTION Waterborne acrylate paint for maintenance painting of felt roofings.

For maintenance painting of felt roofings.

RECOMMENDED USES Bitumen roofings.

  The paint is suitable for roofs The paint is full-matt The paint is water-borne Tool: roller Tool: spray Tool: brush
The coverage of the paint on rough surfaces
The coverage of the paint on smooth surfaces
Base paints C
Colour Range Colors tinted with C-base paint from the following color cards:
Sheet-metal roof paints, Façade and Wooden Façades.
Gloss grade Full-matt
Coverage 4-8 m2/l applied once
Can sizes 2.7 l and 9 l
Thinner Water
Application method

Brush, roller or spray.

High pressure spray application

- nozzle 0.018" - 0.023"

- thinning 0-10 % by volume

Drying time at 23°C and 50% relative air humidity Touch dry 1-2 hours. Recoatable the following day. Relative humidity of air, temperature and wind strongly affect the drying time.
Weather resistance Good also in industrial and marine climate.
Solids volume Approx. 40 %
Density Approx. 1.3 kg/l, ISO 2811.
Storage Protect from frost.
Product code 49V

Application conditions The surface to be painted must be undamaged and dry, air temperature at least +5˚C and relative humidity of the air below 80 %. Do not paint in strong sunlight. Paint before the evening dew, because moisture causes fading of the fresh paint surface and it slows the drying process. Do not paint under the risk of rain or if the surface to be painted is too hot (>+40˚C).
Preparation Clean the surfaces from dirt, dust, moss and lichen. Wash the surfaces lightly with water using a high pressure washer. Cleaning performance can be improved by using Homeenpoisto Mould Removal.
Repair and seal the damages in the bitumen roofing by using a suitable bitumen putty.
Applicable national health and safety precautions must be followed in the treatment of substrates containing asbestos.
Painting Mix Kilpi Huopakattomaali carefully before use. Apply twice.
In roller or spray application the first coat is finalized with a brush. Thin the paint approx. 15 % with water for the priming coat. Apply the finishing coat with unthinned Kilpi Huopakattomaali. Reserve enough paint for a uniform surface mixed in one container to avoid eventual variations of shade.
Cleaning of tools Clean tools with water. Slightly hardened tools are recommended to be cleaned with Tikkurila Pensselipesu Tool Cleaner.
Maintenance instructions After two weeks from painting contaminated surface can be cleaned carefully by rinsing with water and without detergent.
Maintenance treatment Surfaces painted with Kilpi Huopakattomaali are maintenance painted with the same product.
EU VOC 2004/42/EC-limit value (cat A/i) 140g/l(2010)
Kilpi Huopakattomaali contains VOC max. 140 g/l.

according to Regulation (EC) No. 1272/2008
Contains 1,2-benzisothiazol-3(2H)-one and reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H-isothiazol-3-one [EC no. 220-239-6] (3:1). May produce an allergic reaction. Wear protective gloves.. A Safety Data Sheet is available on request. Safety data sheet

ENVIRONMENTAL and WASTE DISPOSAL Recycle empty, dry cans or dispose them of in accordance with local regulations. Destroy liquid waste according to the local regulations for hazardous waste!
TRANSPORT ADR/RID not classified
jar151014 / lehte151014 / ser110315 / akk160315 / 49V