Tikkurila worldwide
(Previous date 18.12.2013)'

Luja Universal Primer

Luja Yleispohjamaali 9L[1]
DESCRIPTION Acrylate primer
PRODUCT FEATURES For priming and finishing concrete, filler treated, brick, cardboard, chipboard and wood fibre board surfaces. Also adheres well to previously painted clean dispersion, alkyd, epoxy and acid catalyzed paint surfaces.
RECOMMENDED USES Interior walls and ceilings. Suitable as a primer for Luja finishing paints and Tikkurila interior acrylate paints. Also under wallpapers.

  The paint is suitable for interior walls The paint is full-matt The paint is water-borne Tool: roller Tool: spray Tool: brush
The coverage of the paint on rough surfaces
The coverage of the paint on smooth surfaces
Base paints AP
Colour Range White. Can be tinted to light shades from Tikkurila Symphony colour collection. Use only half of the colourant amount given in the formula. Colour accuracy is not perfect.
Gloss grade Full-matt
Building material emission class M1
Coverage Non-absorbent surfaces 7 - 10 m2/l. Absorbent surfaces 5 - 8 m2/l.

Can sizes 0,9 l, 2,7 l, 9 l, 18 l.
Thinner Water
Application method Brush, roller or spray. For airless spray application, use a nozzle 0.015" - 0.021" Thinning: 0 - 10 vol-%

Drying time at 23°C and 50% relative air humidity Dry to touch in half an hour. Re-coatable after 2 hours.
Wet scrub resistance SFS-EN 13300 class II, ISO 11998
Chemical resistance Resists cleaning detergents and weak solvents, e.g. White Spirit.
Heat resistance 85ºC, ISO 4211-3.
Solids volume 36 %.
Density 1.4 kg/l, ISO 2811.
Storage Protect from frost.
Product code 219_0201

Application conditions The surface to be painted must be dry, the temperature of the air at least +5ºC, and the relative humidity of the air below 80 %.
Preparation Unpainted surfaces:
Remove all dirt and dust. Fill the surfaces with a suitable Presto filler and sand the dried surface. Remove sanding dust.
Previously painted surfaces:
Wash down previously painted surfaces with Cleaning Agent (Maalipesu) and rinse carefully with water. Fill holes and cracks with a suitable Presto filler and sand the dried surface. Remove sanding dust.
Painting Stir Luja Universal Primer well before use and thin with water, if necessary. Apply by brush, roller or spray. Finish the surface with Luja Finishing Paint, Remontti-Ässä or Ässä finishing paint.
Cleaning of tools Clean tools with water. Use of Tikkurila Pensselipesu (Tool Cleaner) is recommended when cleaning a bit hardened paint from the brush.
Maintenance instructions Clean the surfaces with neutral (pH 6-8) detergent with soft brush, sponge or cloth at the earliest 1 month after painting. Follow the dilution instructions of the detergent manufacturer. The surface may not remain wet after the cleaning.
Be careful with the painted surfaces during few weeks time, because the paint will achieve its final hardness and durability in normal conditions after 1 month.
If the surfaces must be cleansed soon after painting, cleanse them lightly with a damp cleaning cloth.
EU VOC 2004/42/EC-limit value (cat A/g) 30g/l(2010)
Luja Universal Primer contains VOC max. 30 g/l

according to Regulation (EC) No. 1272/2008
The product is not classified as dangerous. A Safety Data Sheet is available on request. Safety data sheet

ENVIRONMENTAL and WASTE DISPOSAL Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.
ser070415 / garta181214 / pih101214 / ome040609 / 2190201