Tikkurila worldwide
(Previous date 02.05.2014)'

Ultra Primer - Exterior Wood Primer

DESCRIPTION Acrylate primer and undercoat for exterior wood surfaces.

Suitable for exterior painting of new, factory primed surfaces or surfaces previously painted with exterior paints for wooden facades before finishing with Ultra house paints or Pika-Teho.

RECOMMENDED USES Wooden exterior cladding, weatherboards, railings, fences, etc.

  The paint is suitable for exterior walls The paint is matt The paint is water-borne Tool: spray Tool: brush
The coverage of the paint on rough surfaces
The coverage of the paint on smooth surfaces
Base paints AP and C
Colour Range White AP base paint can be used as such or tinted close to the shade of the topcoat. Colour accuracy is not perfect.
Always tint C base paint before use.
Gloss grade Matt
Coverage 4 - 6 m2/l for sawn wood surfaces, 7 - 9 m2/l for planed wood surfaces

Can sizes 0.9 L (only AP base paint), 2.7 L, 9 L
Thinner Water
Application method Apply with a wide paint brush or with high-pressure spraygun and brush.
High-pressure spray:
- nozzle 0.018 - 0.023 i.e. 0.460 - 0.580 mm
- thinning 0 – 10 vol-%

Drying time at 23°C and 50% relative air humidity Touch  dry after 1 hour, recoatable after 2-4 hours under normal conditions. Low temperature and high relative humidity of air will extend drying time.
Solids volume 40 %.
Density 1.3 kg/l, ISO 2811
Storage Protect from frost. Poorly closed or half empty can does not withstand long-term storage.
Product code 698

Application conditions The surface to be painted must be dry i.e the moisture content of the wood shall not exceed 20 %. During painting and drying, the temperature of the air must be at least +5 ºC, and the relative humidity of the air below 80 %.
Preparation Untreated surfaces:
Remove all dirt, mould and loose material from untreated or industrially primed wood surface. Wash dirty and mouldy surfaces with Tikkurila Mould Removal solution according to instructions. Treat bare wood surfaces with Valtti Base or Valtti Akvabase priming oil at the earliest possible construction stage. Protect nail heads and other rusting metal parts with Rostex Super Metal Primer. Remove loose resin from knots.

Previously treated surfaces:
Scrape away loose paint, finish clean with a steel brush. Wash down dirty and mouldy surfaces with Tikkurila Mould Removal solution according to instructions. Treat bare wood surfaces with Valtti Base or Valtti Akvabase priming oil. Patch paint with Ultra Primer.

Painting Stir the paint carefully before use and thin with water max. 10 %, if necessary. Apply with wide paint brush or high-pressure spray gun and brush. Treat end-grain carefully.
Top coat is recommended to be applied as soon as possible after priming, however latest within 10 months from priming.
Finish 1-2 times with Ultra or Pika-Teho house paint depening on the colour difference of the substrate and the condition of the surface to be treated.
Discoloration of paint may occur over knots and resinous areas present in the wood. Using a primer reduces discoloration.
Cleaning of tools Clean tools with water. Tikkurila Pensselipesu (Tool Cleaner) is recommended to be used for cleaning hardened paint from tools.
EU VOC 2004/42/EC-limit value (cat A/d) 130g/l(2010)
Ultra Primer contains VOC max. 130g/l

according to Regulation (EC) No. 1272/2008
Contains: 2-Octyl-2H-isothiazol-3-one. Warning. May cause an allergic skin reaction. Toxic to aquatic life with long lasting effects. Keep out of reach of children. If medical advice is needed, have product container or label at hand. Avoid breathing mist/spray. Wear protective gloves. Use only outdoors or in a well-ventilated area. Avoid release to the environment. IF ON SKIN: Wash with plenty of soap and water. Contains small amounts of sensitizing substances: 3-iodo-2-propynyl butylcarbamate and reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2Hisothiazol-3-one [EC no. 220-239-6] (3:1). A Material Safety Data Sheet is available on request. Safety data sheet

ENVIRONMENTAL and WASTE DISPOSAL Avoid spillage into drains, water systems and soil. Recycle empty, dry cans or dispose them of in accordance with local regulations. Destroy liquid waste according to the local regulations for hazardous waste.
sre160516 / jha281113 / akk250414 / hsa290416 / 698 6201_6003