Tikkurila
PRODUCT DATA SHEET
05.11.2014
 

Duett Glue

Description
PVAc dispersion and starch-based ready-to-use glue for walls
Product features
For attaching non-woven wallpapers.
Recommended uses
Wall surfaces in dry interior premises.

TECHNICAL DATA
The paint is suitable for interior walls The paint is water-borne Tool: roller Tool: brush
The coverage of the paint on rough surfaces
5
m2/l
The coverage of the paint on smooth surfaces
6
m2/l
Colour Range
Translucent
Building material emission class
M1
Coverage
5-6 m²/l.
Can sizes
3 l
Thinner
Water
Application method
Roller, brush
Solids volume
approx. 13%
Density
approx. 1.02 kg/l, ISO 2811.
Storage
Protect from frost. Store in dry and cool place, protected from sunlight. Opened can should be used within one month. Close the lid carefully for next use.
Product code
0083700

APPLICATION DETAILS
Application conditions
The surface to be treated must be dry, the temperature at least +15°C, and the relative humidity of the air below 85 %. Wallpaper and glue should be warmed up to the normal air temperature of the room before the installation.
Preparation
Remove old loose wallpapers and paints, as well as textured wallpapers and the plastic surface of vinyl wallpapers. Fill any uneven areas with a suitable Presto product. Prime porous substrates e.g. with Varma Primer or prime with Duett glue thinned with water 1:1.
Wash down previously painted surfaces with diluted Maalipesu detergent and rinse carefully with water.
Wallpapering
Apply glue onto the wall with a roller, covering the equivalent of 1.5–2.5 wallpaper widths at a time.
Apply the wallpaper directly to the pasted wall. Carefully smooth out the wallpaper moving from top to bottom using a plastic spatula, and be careful not to leave any air bubbles.
Removal of glue stains
Immediately wipe off any paste that seeps out between the seams with a clean, damp sponge.
Cleaning of tools
Remove excess glue from the tools and wash down with water. Tikkurila Tool Cleaner is recommended to remove a slightly hardened product.
Maintenance instructions
Wipe the stains with a cleaning cloth moistened in warm water and using a mild detergent. Rinse off carefully and wipe the surface dry. Avoid water contact with the seams.

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
Contains reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H-isothiazol-3-one [EC no. 220-239-6] (3:1). May produce an allergic reaction. Wear protective gloves. A Safety Data Sheet is available on request.
Safety data sheet

ENVIRONMENTAL and WASTE DISPOSAL
Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.
TRANSPORT
not classified
ser031214 / mkv04112014 / akk121214 / 0083700