Tikkurila
PRODUCT DATA SHEET
08.09.2017
 

Helmi Furniture Filler - New Product

Description
Water-borne special furniture filler.
Product features
For filling small holes prior to finishing painting, for new as well as previously painted surfaces. Filling capacity 3 mm.
Recommended uses
Fixtures, furniture, doors, windows and other dry interior wood surfaces.

TECHNICAL DATA
The paint is water-borne
Colour Range
White
Can sizes
200 ml
Thinner
Water
Application method

Application by trowel

Drying time at 23°C and 50% relative air humidity
Thin filling layer (1 mm) can be sanded after approx. 1 hour. Drying time depends on layer thickness, relative humidity of the air and temperature. 
Filling capacity
Max. 3 mm
Solids volume
74 %.
Density
1.7 kg/l, ISO 2811
Storage
Protect from frost. Store in dry and cool place, protected from sunlight.

APPLICATION DETAILS
Application conditions
The surface to be treated must be dry, the temperature of the air at least +10ºC, and the relative humidity of the air below 80 %.
Preparation
Unpainted surface:
Clean the surface from dirt. Dust off and remove loose particles. Apply Presto Furniture Filler with a trowel.

Previously painted surface:
Clean previously painted surfaces with Kalustepesu cleaning agent. After the surface has dried, remove flaking paint and sand the paint surfaces until matt. Remove sanding dust.
Smoothing
Apply Helmi Furniture Filler with a smoothing trowel. Apply on bigger holes rather two or three times. Sand the surface and remove sanding dust. Finishing painting can be done with a water-borne or alkyd paint.
Cleaning of tools
Clean tools with water.

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
The product is not classified as dangerous. Contains 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction. Wear protective gloves. A Material Safety Data Sheet is available on request.

ENVIRONMENTAL and WASTE DISPOSAL
Recycle empty, dry cans or dispose them of in accordance with local regulations.
TRANSPORT
not classified
-