Tikkurila
PRODUCT DATA SHEET
08.09.2017
 

Helmi Patterimaali - Paint for Radiators

Description
Non-yellowing, heat resistant paint for radiators.
Product features

For interior use. Suitable for water-to-air radiators, not recommended for electric heaters. Also suitable for pre-painted surfaces painted with powder or alkyd paints.

Recommended uses
Water-to-air radiators, piping, metal-sheet wood-burning stoves, etc

TECHNICAL DATA
The paint is semi-matt The paint is water-borne Tool: roller Tool: spray Tool: brush
The coverage of the paint on rough surfaces
8
m2/l
The coverage of the paint on smooth surfaces
10
m2/l
Colour Range
White 595L
Gloss grade
Semi-matt
Building material emission class
M1
Coverage
8-10 m2/l

Can sizes
1/3 l and 1 l
Thinner
Water
Application method

Synthetic fiber brush, roller.

Conventional spray:

-pressure 3-4 bar

-nozzle 1.4-1.8 mm

-thinning 20-40 vol-%

Airless spray:

-nozzle pressure 140-160 bar

-nozzle 0.009˝-0.013˝

-thinning 0-5 vol-%

Air assisted airless spray:

-nozzle pressure 80-120 bar

-atomization air pressure 1-2 bar

-nozzle 0.009˝-0.011˝

-thinning 0-5 vol-%           

 

Drying time at 23°C and 50% relative air humidity

Dust dry in approx. 1 hour.

Recoatable in approx. 16 hours.

Ready to use hardness after 2-3 days.

Wet scrub resistance
SFS-EN 13300 class I, ISO 11998
Chemical resistance
Resists cleaning detergents and weak solvents e.g. White Spirit.
Light resistance
Non-yellowing
Heat resistance
85°C
Solids volume
Approx. 40%
Density
Approx. 1.2 kg/l in white (ISO 2811)
Storage
Protect from frost.

APPLICATION DETAILS
Application conditions
The surface to be treated must be dry, the temperature of the air at least +8°C, and the relative humidity of the air below 80 %. The surface to be painted may not be warm.
Priming
Unpainted surfaces: Prime metal surfaces with Rostex Super Akva Metal Primer.
Previously painted surfaces:
Wash down previously painted surfaces with Tikkurila Kalustepesu Cleaning Agent and rinse carefully with water. Remove loose, flaking paint with a scraper and sand hard, glossy and industrially painted surfaces matt. Remove sanding dust.
Painting
Stir the paint thoroughly down to the bottom and thin with water, if necessary (max. 5%). Apply by brush, roller or spray 1-2 times. Apply on large surfaces first with a roller and level with a brush. Multi-branched synthetic brushes are best suited for the work.
Cleaning of tools
Remove excess paint from tools. Clean tools with water. Tikkurila Pensselipesu (Tool Cleaner) is recommended to be used to remove a bit hardened paint.
Maintenance instructions
Cleaning earliest approx. 1 month after painting: The surfaces are cleaned with a soft brush, sponge or cleaning cloth and neutral (pH 6-8) dish washing solution. Clean very dirty surfaces with weakly alkaline (pH 8-10) washing detergent and e.g. cleaning cloth or sponge. Rinse the surface carefully.
The product achieves its final hardness and durability after one month under normal conditions, therefore the surfaces must be handled with care during a couple of weeks. If the surfaces need to be cleaned soon after finishing, clean them lightly with a soft brush or damp cleaning cloth.
EU VOC 2004/42/EC-limit value
(cat A/d) 130g/l(2010)
Helmi Patterimaali contains VOC max. 130 g/l.

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
Contains 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction. Wear protective gloves. A Material Safety Data Sheet is available on request.

ENVIRONMENTAL and WASTE DISPOSAL
Recycle empty, dry cans or dispose them of in accordance with local regulations. Destroy liquid waste according to the local regulations for hazardous waste.
TRANSPORT
ADR: not classified
mkv29092017 /