Tikkurila
PRODUCT DATA SHEET
07.07.2016
(Previous date 22.01.2012)
 

Homeenpoisto (Mould Removal)

Description
Hypochlorite solution for mould removal from unpainted and painted surfaces.
Product features
Hypochlorite solution for mould removal.  
Recommended uses
For mould removal from unpainted and painted exterior wooden, plaster and concrete surfaces before painting or repainting. Also suitable for concrete block and fiber cement roofs before maintenance painting.

TECHNICAL DATA
The paint is water-borne Tool: spray
Features
pH-value of ready-to-use solution: approx. 12
Coverage

Depends on the cleaning need of the surface.

Can sizes
1 l and 5 l.
Thinner
Water
Mixing ratio
Dilute Mould Removal with water, mixing ratio 1:3.
Application method

Spray, sponge or brush

Density
approximately 1.1 kg/l, ISO 2811
Storage
Protect from frost.
Product code
006_1905

APPLICATION DETAILS
Protection
Protect glass, aluminium or other surfaces which can be damaged by the effect of the product. Avoid splashes to the clothes and for example to untreated furniture. The product is bleaching.
Surface cleaning
Apply the diluted mixture on mould effected exterior surface with sponge, smooth brush or for larger areas more efficiently with garden spray from the bottom upwards to avoid possible streaks. Streaks may occur if the work is done in the opposite direction. Let the solution act for about half an hour. The solution may affect longer if the substrate is very moldy. Use brush, if necessary. After the treatment rinse the surfaces carefully with clean water, from above downwards, e.g. with spray.
Post-treatment
Prime the untreated wooden surface as soon as the surface gets dry with Valtti Base before finishing. Take care of the maintenance painting for previously painted surfaces.
Cleaning of tools
Clean tools with water.

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
GHS05
GHS05
GHS09
GHS09
Contains: Sodium hypochlorite, sodium hydroxide, potassium silicate and N,N-dimethyltetradecylamine N-oxide. Danger. Causes severe skin burns and eye damage. Very toxic to aquatic life. Keep out of reach of children. If medical advice is needed, have product container or label at hand. Avoid breathing vapor. Wear protective gloves/clothing and eye/face protection. Use only outdoors or in a well-ventilated area. Avoid release to the environment. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF ON SKIN: Take off immediately all contaminated clothing. Rinse skin with water or shower. Immediately call a POISON CENTER or doctor/physician. Warning! Do not use together with other products. May release dangerous gases (chlorine). Contains < 5 % anionic surfactants, < 5 % non-ionic surfactants and < 5 % chlorine-based bleaching agents. A Safety Data Sheet is available on request.
Safety data sheet

ENVIRONMENTAL and WASTE DISPOSAL
Do not mix the product with other detergents. Do not empty undiluted solution into drains, water systems and soil. Recycle empty, dry cans or dispose them of in accordance with local regulations. Destroy the undiluted liquid waste according to the local regulations for hazardous waste.
TRANSPORT
VAK/ADR 8 III
sre070916 / mli171106 / pia231006 / akk070916 / 0061905