(Previous date 23.11.2012)

KILPI Tiilikattomaali - Roof Tile Paint

Waterborne modified acrylate paint.
Product features

For maintenance painting of concrete roof tiles. 

Recommended uses
Throughout dyed and industrially painted concrete tile roofs.

The paint is suitable for roofs The paint is full-matt The paint is water-borne Tool: spray Tool: brush
The coverage of the paint on rough surfaces
The coverage of the paint on smooth surfaces
Colour Range
Tile red (0511), Cottage red (0517), Brown (0518), Dark grey (0520), Black (0521).
Gloss grade
2-4 m2/l applied twice on concrete block  (depending on the profile and absorbance) 
Can sizes
10 l.
Application method
Brush (tool T6) or spray and brush. High pressure spray nozzle 0,013" - 0,018" (nominal angle 40°- 50°).
Drying time at 23°C and 50% relative air humidity
Withstands rain and dew 1-2 hours after application. Second coat to be applied the following day at the earliest. Drying will be retarded when the relative humidity of the air is rising and the temperature sinking. 
Weather resistance
Good also in industrial and marine climate.
Solids volume
Approx. 40 %
Approx. 1.25 kg/l, ISO 2811
Protect from frost.
Product code

Application conditions
The surface to be painted must be solid and dry, air temperature at least +5°C and relative humidity of the air below 80 %. Schedule the painting work so that paint film will be dry before the evening dew. Do not paint under the risk of rain.
Check the condition and performance of the roof before starting the work. Reserve enough paint of the same batch to avoid eventual slight variation of shade. The profile of the roof increases the area to be treated. The product is not suitable for clay tile roofing. If you need to replace old roof tiles with new ones, make sure from the producer that the new material can be painted.

Clean the surfaces from dirt, dust, moss and lichen. Use high pressure washer, avoiding damaging the substrate and structures. Wash concrete tile roofs with Tikkurila Homeenpoisto Mould Removal solution according to instructions.
Applicable national health and safety precautions must be followed in the treatment of substrates containing asbestos.
Mix the paint carefully before use. Apply the paint with a brush or spray.
In spray application the priming is finalized with a painting brush to ensure that the paint is penetrated into the pores of the substrate and that the adhesion is adequate.
Concrete tile roofing (2 x application):

Apply two coats of Kilpi Roof Tile Paint. For the first coat the paint is thinned up to 10-20% with water according to the porosity of the substrate. Apply one finishing coat at the earliest the following day after priming. In finishing the paint can be thinned 5-15% with water, if necessary.
Cleaning of tools
Clean tools with water. Slightly hardened tools can be cleaned with Pensselipesu Tool Cleaner.
Maintenance instructions
The product contains film protecting agents, therefore rainwater flowing from the roof is not recommended to be used for watering plants or washing during the first year from painting.

Handle the painted surface with care. The surface achieves its final hardness and durability within approx. 4 weeks.

Earliest after 1 month of application the surface can be cleaned with Huoltopesu Maintenance Cleaner (mixing ratio 1 part of Maintenance Cleaner in 10 parts of water). Rinse surfaces carefully after cleaning and let dry.
Maintenance treatment
Surfaces painted with Kilpi Tiilikattomaali Roof Tile Paint can be maintenance painted with the same product.
EU VOC 2004/42/EC-limit value
(cat A/i) 140g/l(2010)
Kilpi Tiilikattomaali contains VOC max. 140 g/l.

according to Regulation (EC) No. 1272/2008
Contains: terbutryn. HARMFUL TO AQUATIC ORGANISMS, MAY CAUSE LONG-TERM ADVERSE EFFECTS IN THE AQUATIC ENVIRONMENT. Do not empty into drains. Contains terbutryn. May produce an allergic reaction. A Material Safety Data Sheet is available at request.

Avoid spillage into drains, water systems and soil. Recycle empty, dry cans or dispose them of in accordance with local regulations. Destroy liquid waste according to the local regulations for hazardous waste.
ADR/RID not classified
ser210715 / sna230415 / lehte220415 / 494s