Tikkurila
PRODUCT DATA SHEET
18.12.2014
(Previous date 18.12.2013)
 

Luja Universal Primer

Description
Acrylate primer
Product features
For priming and finishing concrete, filler treated, brick, cardboard, chipboard and wood fibre board surfaces. Also adheres well to previously painted clean dispersion, alkyd, epoxy and acid catalyzed paint surfaces.
Recommended uses
Interior walls and ceilings. Suitable as a primer for Luja finishing paints and Tikkurila interior acrylate paints. Also under wallpapers.

TECHNICAL DATA
The paint is suitable for interior walls The paint is full-matt The paint is water-borne Tool: roller Tool: spray Tool: brush
The coverage of the paint on rough surfaces
5
m2/l
The coverage of the paint on smooth surfaces
10
m2/l
Base paints
AP
Colour Range
White. Can be tinted to light shades from Tikkurila Symphony colour collection. Use only half of the colourant amount given in the formula. Colour accuracy is not perfect.
Gloss grade
Full-matt
Building material emission class
M1
Coverage
Non-absorbent surfaces 7 - 10 m2/l. Absorbent surfaces 5 - 8 m2/l.

Can sizes
0,9 l, 2,7 l, 9 l, 18 l.
Thinner
Water
Application method
Brush, roller or spray. For airless spray application, use a nozzle 0.015" - 0.021" Thinning: 0 - 10 vol-%

Drying time at 23°C and 50% relative air humidity
Dry to touch in half an hour. Re-coatable after 2 hours.
Wet scrub resistance
SFS-EN 13300 class II, ISO 11998
Chemical resistance
Resists cleaning detergents and weak solvents, e.g. White Spirit.
Heat resistance
85ºC, ISO 4211-3.
Solids volume
36 %.
Density
1.4 kg/l, ISO 2811.
Storage
Protect from frost.
Product code
219_0201

APPLICATION DETAILS
Application conditions
The surface to be painted must be dry, the temperature of the air at least +5ºC, and the relative humidity of the air below 80 %.
Preparation
Unpainted surfaces:
Remove all dirt and dust. Fill the surfaces with a suitable Presto filler and sand the dried surface. Remove sanding dust.
Previously painted surfaces:
Wash down previously painted surfaces with Cleaning Agent (Maalipesu) and rinse carefully with water. Fill holes and cracks with a suitable Presto filler and sand the dried surface. Remove sanding dust.
Painting
Stir Luja Universal Primer well before use and thin with water, if necessary. Apply by brush, roller or spray. Finish the surface with Luja Finishing Paint, Remontti-Ässä or Ässä finishing paint.
Cleaning of tools
Clean tools with water. Use of Tikkurila Pensselipesu (Tool Cleaner) is recommended when cleaning a bit hardened paint from the brush.
Maintenance instructions
Clean the surfaces with neutral (pH 6-8) detergent with soft brush, sponge or cloth at the earliest 1 month after painting. Follow the dilution instructions of the detergent manufacturer. The surface may not remain wet after the cleaning.
Be careful with the painted surfaces during few weeks time, because the paint will achieve its final hardness and durability in normal conditions after 1 month.
If the surfaces must be cleansed soon after painting, cleanse them lightly with a damp cleaning cloth.
EU VOC 2004/42/EC-limit value
(cat A/g) 30g/l(2010)
Luja Universal Primer contains VOC max. 30 g/l

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
The product is not classified as dangerous. A Safety Data Sheet is available on request.
Safety data sheet

ENVIRONMENTAL and WASTE DISPOSAL
Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.
TRANSPORT
VAK/ADR -
ser070415 / garta181214 / pih101214 / ome040609 / 2190201