Tikkurila
PRODUCT DATA SHEET
01.10.2011
 

Nostalgia Wood Wax

Description
Protective liquid wax for wood.
Product features

Suitable for untreated paneled walls and ceilings, furniture, doors and window frames in dry interior rooms.  

Recommended uses
Suitable for untreated paneled walls and ceilings, furniture, doors and window frames in dry interior rooms.

TECHNICAL DATA
The paint is suitable for interior walls Tool: spray Tool: brush
The coverage of the paint on rough surfaces
10
m2/l
The coverage of the paint on smooth surfaces
13
m2/l
Colour Range
Ready shades: Honey, Raisin, Coconut.
Other shades: Champignon, Chocolate, Blue Cheese, Oyster, Earl Grey and Pepper from Nostalgia colour card.
These shades can be tinted from the natural coloured Ginger.
Ginger can also be used as such. See colour sticker on the can.
See Nostalgia brochure/colour card!

Note! Use tinted product within 3 months from tinting to avoid eventual change in the colour!
Gloss grade
undefined
Coverage
10-13 m2/l depending on the porosity of the surface.
Can sizes
0.225 l, 0.333 l, 0.9 l, 1 l
Mixing ratio
Use unthinned product, for more transparent effect thin the wax with colourless Ginger base wax.
Application method
Brush, clean cloth or spray, polishing rag or buffing cloth.
Drying time at 23°C and 50% relative air humidity

Dust dry approx. ½-1 h. Recoatable after 1-2 h. Ready for use after 24 h.

Solids volume
approx 24 w %.
Density
1 kg/l, ISO 2811.
Storage
Protect from frost!

APPLICATION DETAILS
Application conditions
The surface to be treated must be dry, temperature at least +5 oC and relative humidity of the air below 80 %.
Preparation
Clean the surface from dirt and dust. Moisten it lightly with water spray, let the surface dry, grind off the protruding woodfibres and dust off.
Treatment
Mix Nostalgia Wood Wax carefully, also occasionally during application. Apply 1-2 layers in direction of the wood grain. The wax is liquid and it is easiest to spread with foam plastic trowel or sponge. Two wax layers give more glossy and waxy surface.
Before you start, test the wax in a hidden spot. The final colour and gloss are affected by the properties of wood species. Handle the small surfaces throughout consecutively, large panel surfaces 1-2 boards at a time to obtain a uniform colour. Should you like a more translucent finish, thin it with colourless Wood Wax (Ginger), do not use water for thinning!
Cleaning of tools
Clean the tools with water and soap. Tikkurila Pensselipesu (Tool Cleaner) is recommended for removal of hardened Nostalgia Wood Wax.
Maintenance instructions
Handle the surfaces with care during few weeks after the treatment as the product achieves its final hardness and durability after approx.1 month in normal conditions. If the surfaces need to be cleaned soon after surface treatment, clean them lightly with a soft brush or damp cloth. Remove stains as soon as possible with a damp cloth and neutral (pH 6-8) detergent.

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
The product is not classified as dangerous. A Safety Data Sheet is available on request.

ENVIRONMENTAL and WASTE DISPOSAL
Recycle empty, dry cans or dispose them of in accordance with local regulations. Destroy liquid waste according to the local regulations.
TRANSPORT
VAK/ADR -
sre190711 / ome200711