Tikkurila
PRODUCT DATA SHEET
28.06.2013
(Previous date 01.10.2007)
 

Presto LF - Renovation Filler

Description
Water-borne, ready to use renovation filler. Filling ability: 4 mm without cracking. Minor shrinkage and good adhesion.
Product features
Especially suitable for previously painted surfaces, total or partial filling of gypsum board, wood fibre board, smooth concrete, and plaster surfaces, but also chipboard and wood fibre board. Also ideal for filling gypsum board seams and fastening seam ribbon.
Recommended uses
Walls and ceilings in dry interior premises.

TECHNICAL DATA
The paint is suitable for interior walls The paint is suitable for ceilings The paint is water-borne Tool: trowel
Colour Range
Nearly White
Building material emission class
M1
Can sizes
200 ml, 500 ml, 3 l, 10 l.
Thinner
Water
Mixing ratio
Water, usually not thinned.
Application method
Smoothing trowel
Drying time at 23°C and 50% relative air humidity
Sanding and painting of the surface can be carried out after the filler has totally dried, under normal conditions after 2-24 hours depending on the layer thickness, temperature and the relative humidity of the air.
Particle/grain size

max. 0,15 mm

Solids volume
61 %
Density
1.2 kg/l, ISO 2811
Storage
Protect from frost.
Product code
001_6532
Shrinkage and cracking
Minor shrinkage and good adhesion.

APPLICATION DETAILS
Application conditions
The surface to be treated must be dry, the temperature of the air over
5 º C and the relative humidity of the air below 80 %.
Preparation
Unpainted surfaces:
Remove any dirt and grease. Brush off any dust or loose material. Plane the surfaces directly with Presto LF Renovation Filler.

Previously painted surfaces:
Wash down previously painted surfaces with Maalipesu (Cleaning Agent) cleaning detergent and rinse thoroughly with water. Remove loose paint with a scraper and sand hard, glossy surfaces matt. Remove sanding dust. Apply Presto LF Renovation Filler with a smoothing trowel.
Filling
Apply Presto LF Renovation Filler with a smoothing trowel. Sand the dried surface and remove sanding dust. Apply another filling coat, if necessary.
Cleaning of tools
Clean tools with water.

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
The product is not classified as dangerous. A Safety Data Sheet is available on request.

DECLARATION OF PERFORMANCE

ENVIRONMENTAL and WASTE DISPOSAL
Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.
TRANSPORT
ADR: not classified
joa170613 / pih140613 / 001 653


CE
CE logo
Tikkurila Oyj
Kuninkaalantie 1
FI-01300 VANTAA
13
TIK-1650-5003A
EN 13963:2005
Jointing material of gypsum plasterboards - Type 3A
Flexural strength
>320 N
Release of dangerous substances
NPD
Reaction to fire
A2 -s1, d0


CE
CE logo
Tikkurila Oyj
Kuninkaalantie 1
FI-01300 VANTAA
13
TIK-1650-5003B
EN 15824:2009
Internal plaster based on organic binder
Release of dangerous substances
NPD
Reaction to fire
B -s1,d0
Adhesion strength by pull off test
≥ 0,3MPa