(Previous date 01.01.2012)

Valtti Furniture and Decking Oil Brown, Gray and Black

Solvent-borne ready-to-use colored wood oil containing wax, for outdoor use.
Product features
Suitable for surface oil treatment and colouring hardwoods brown for outdoor use. Also suitable for thermowood, impregnated and untreated wood, as well as wood previously treated with oil. The final colour of the surface will depend on the original wood colour. Grey oil works best on pale, neutral coloured substrate. Already grey and soft wood soaks up oil and the end result will be dark. Always test before application.
Recommended uses
Terraces, garden furniture, jetties, stairs

The paint is solvent-borne Tool: spray Tool: brush
The coverage of the paint on rough surfaces
The coverage of the paint on smooth surfaces
Colour Range
Brown, grey and black
Gloss grade

5-7 m2/l on old and worn wood surface

7-15 m2/l on new surface or wood surface in good condition

Can sizes
0.9 l, 2.7 l and 9 l
White Spirit 1050
Application method
Brush, spraying or sponge.
Drying time at 23°C and 50% relative air humidity
Surface dries in several hours, depending on the porosity of the surface and the amount of oil used. Apply the second coat as soon as the surface is dry.
Weather resistance
Carry out maintenance if necessary. Surfaces continuously exposed to the weather may need to be treated annually.
Solids volume
0.9 kg/l, ISO 2811
Unaffected by cold storage. Badly closed or short cans and/or tinted products do not withstand long storage.
Product code

Application conditions
The surface to be treated must be dry and relative wood moisture content less than 20 %, as damp wood will not absorb oil, which dries slowly. As impregnated wood is often damp, we recommend treatment after a 6-month drying period.
The surface to be painted, the paint and the air temperature must be at least +5°C, and relative humidity below 80% during painting and drying
Untreated surfaces:
Remove all dirt, dust and loose material from the surface. Wash dirty wood surface with
Terassi- ja Kalustepesu according to instructions.
Surfaces previously treated with wood oil:
Remove loose material from the surface with a scraper or wire brush. Wash dirty wood surface with Terassi- ja Kalustepesu according to instructions. If a clear film remains on the surface, remove it before treatment. Allow the surface to dry, as moist wood does not absorb oil, which dries slowly in damp conditions.
Reserve sufficient amount of the product from the same batch for one uniform surface. Stir Valtti Furniture and Decking Oil thoroughly before and frequently during use. Apply one coat of oil tightly by brush, spray or sponge so that all the oil is absorbed into the wood. Wipe off eventual excessive oil. To avoid overlapping, apply two thin coats of oil in continuous strokes to cover the whole surface evenly. One application is usually enough for exterior furniture. Porous wood may need two coats. When treating jetties take care that the oil does not end up in the water. Apply the second coat as soon as the surface is dry, after some hours depending on the weather. Every oil treatment will make the wood colour darker.
Cleaning of tools
White Spirit 1050 or Tikkurila Pensselipesu (Tool Cleaner).
Maintenance instructions
After application, treat the surface carefully for the first week to allow it to harden completely. After two days, gently clean the surface with a soft brush or mop if necessary.
Clean dirty surfaces with Pihan Huoltopesu (1 part Pihan Huoltopesu to 10 parts water). Remove stains and clean very dirty surfaces with a stronger solution of Pihan Huoltopesu (1:1). After washing, rinse the surfaces and allow to dry.
Maintenance treatment
For maintenance treatment you can also use colourless Valtti Wood Oil if you wish the surface not to be darker. Carry out maintenance if necessary. Surfaces continuously exposed to the weather may need to be treated annually.

according to Regulation (EC) No. 1272/2008
Contains: Hydrocarbons, C9-C11, n-alkanes,isoalkanes,cyclics,<2% aromatics Danger. Flammable liquid and vapor. May be fatal if swallowed and enters airways. May cause drowsiness and dizziness. Harmful to aquatic life with long lasting effects. Contains 3-iodo-2-propynyl butylcarbamate and ethyl methyl ketoxime. May produce an allergic reaction. Wear protective gloves. Keep out of reach of children. If medical advice is needed, have product container or label at hand. Avoid breathing vapor. Use only outdoors or in a well-ventilated area. Keep away from sparks and open flames. - No smoking. IF SWALLOWED: Immediately call a POISON CENTER or physician. Do NOT induce vomiting. Avoid release to the environment. A Material Safety Data Sheet is available at request.
Safety data sheet

Avoid spillage into drains, water systems and soil. Recycle empty, dry cans or dispose them of in accordance with local regulations. Destroy liquid waste according to the local regulations for hazardous waste. NOTE! Cleaning cloths or sanding dust containing the product can create fire by auto-ignition and should be stored in water before disposal, or be dried outdoors or incinerated immediately.
sre130516 / ivk16062011 / hsa29042016 / akk180516 / 005 0428, 005 0429, 005 0430