Tikkurila
PRODUCT DATA SHEET
25.01.2016
 

Valtti Primer - priming oil

Description
Oil-based, colorless priming oil for use on exterior wood. Valtti Primer is absorbed into the wood retarding the adverse effects of moisture and the spread of mould growth on the treated surface.
Product features

For protection and priming of timber and wooden structures before surface treatment. Suitable for sawn and planed timber, woodwork, logs, thermally treated and impregnated wood in exterior use.

 

Finishing coats are recommended to be applied as soon as possible, because colorless priming oil does not protect the wood surface from the adverse effects of sunlight.

Recommended uses
All wooden structures to be treated with wood stains or paints (except surfaces to be treated with wood oils and barn-red paints)

TECHNICAL DATA
The paint is suitable for exterior walls Tool: spray Tool: brush Application conditions
The coverage of the paint on rough surfaces
4
m2/l
The coverage of the paint on smooth surfaces
10
m2/l
Colour Range
Colorless
Coverage
4-5 m2/litre on sawn wood surface. 8-10 m²/l on planed wood surface.
Can sizes
0.9 L, 2.7 L and 9 L
Application method

Brush, dipping or spray.

Drying time at 23°C and 50% relative air humidity
Touch-dry after approx. 1/2 hour. Recoatable after 24 hours.
Solids volume
15 %
Density
approx. 0.8 kg/l, ISO 2811.
Storage
Unaffected by cold storage. Poorly closed or short canisters do not endure long storing.
Product code
005 0500

APPLICATION DETAILS
Application conditions
The surface to be painted must be dry, the temperature of the air at least +5°C during treatment and drying, and the relative humidity of the air below 80 %.
Preparation
Remove dirt, mould and any loose material. If needed, use Mould Removal (Homeenpoisto) solution according to directions of use.
Protect other surfaces and plants from splashes of Valtti Primer.
Diluting
Use unthinned.
Priming
Treat wood surfaces with Valtti Primer in as early construction phase as possible. Apply by brush, dipping or spray. Treat end-grain carefully.
Apply the finishing coat as soon as possible. If the surface treatment is anyhow delayed, prime the surfaces again before finishing.
In spray application protect other surfaces and plants from splashes.
Cleaning of tools
Clean the tools with White Spirit 1050 or Tikkurila Pensselipesu (Tool Cleaner).

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
GHS02
GHS02
GHS07
GHS07
GHS08
GHS08
GHS09
GHS09
Contains: Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, < 2% aromatics and 2-octyl-2H-isothiazol-3-one. Danger. Flammable liquid and vapor. May cause an allergic skin reaction. May be fatal if swallowed and enters airways. May cause drowsiness and dizziness. Toxic to aquatic life with long lasting effects. Keep out of reach of children. If medical advice is needed, have product container or label at hand. Avoid breathing vapor. Wear protective gloves. Use only outdoors or in a well-ventilated area. Keep away from sparks and open flames. - No smoking. Avoid release to the environment. IF ON SKIN: Wash with plenty of soap and water. IF SWALLOWED: Do NOT induce vomiting. Immediately call a POISON CENTER or physician. This primer contains a biocidal product for the preservation of the surface treatment. Contains 2-octyl-2H-isothiazol-3-one, 3-iodo-2-propynyl butylcarbamate. A Material Safety Data Sheet is available on request.
Safety data sheet

ENVIRONMENTAL and WASTE DISPOSAL
Avoid spillage into drains, water systems and soil. Recycle empty, dry cans or dispose them of in accordance with local regulations. Destroy liquid waste according to the local regulations for hazardous waste. Note! Risk of self-ignition of used cleaning rags, paper wipes etc. Contaminated materials can create fire some hours later and should be soked in water and placed in a closed metal container before disposal.
TRANSPORT
ADR: 3 III
sre210116 / kmm210116 / lko191106 / / 0050500