Introduction
Systems
Working instructions
Product data sheet
Colors
Paint calculator
Safety Data Sheets

Stain, lacquer and paint systems for wood industries


PRODUCT DATA SHEET
04.02.2015

Akvi Top DS 25 - Acrylate topcoat

 
Tikkurila Industry 9L
DESCRIPTION A water-borne, one-component acrylate topcoat.
PRODUCT FEATURES Fast-drying topcoat for interior use.
Recommended uses Suitable for panels, doors, mouldings and other wooden/fibre board surfaces.

TECHNICAL DATA
Features Forms very hard paint film.
Good filling properties.
Very good scratch and blocking resistance.
Low VOC content.
Colour Cards RAL, NCS, SSG, BS and SYMPHONY colour cards.
AVATINT tinting system.
Gloss groups Semi-matt
Coverage

Recommended spreading amounts (unthinned)

Theoretical coverage

wet

dry

 

 100–120 g/m2

31–38 µm

10–13 m2/l

 

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.

Thinner Water
Application method

Airless spraying, air-assisted airless spraying and conventional spraying.

 


Drying times

+23ºC

+50ºC

Dust dry, after

20–25 min

5–10 min

Touch dry, after

20–25 min

5–10 min

Dry to sand, after

25–30 min

5–10 min

 

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.

Solids volume Volume solids 39±2%
Weight solids 52±2%
Density 1.25±0,1 kg/ litre
Product code 56V serie

APPLICATION DETAILS
Application conditions Substrate must be clean and dry before painting. During application and drying air temperature, substrate and paint must be over +18ºC and relative humidity of the air must be below 70%.
Preparation Wood surfaces should be sanded with sandpaper P150–240. Primed surfaces should be sanded with sandpaper P240–600. All sanding dust must be removed.
Priming Akvi Primer Pro, Akvi Primer, Diccoplast Primer and Dicco Surf Primer.
Application For airless spraying, the product is thinned approximately 0–5%. Recommended nozzle tip is 0.011"–0.015" and pressure 120–160 bar. Spray angle shall be chosen according to the shape of the object.

For air–assisted airless spraying, the product is thinned approximately 0–5%. Recommended nozzle tip is 0.011"–0.015" and pressure 40–120 bar. Atomising air pressure should be about 1–3 bar. Spray angle shall be chosen according to the shape of the object.

For conventional spraying, the product is thinned approximately 0–5% . Recommended nozzle tip is 1.6–2.2 mm and pressure 2–3 bar.
Mixing of components Stir the paint carefully before use. Thin with water if necessary.
Cleaning of tools Water.
EU VOC 2004/42/EC-limit value The Volatile Organic Compounds amount is 28 g/litre of paint mixture.
VOC content of the paint mixture (thinned 5% by volume) is 26 g/l.
VOC 2004/42/EC (cat A/d) 130 g/l (2010)

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial and professional use only.
Safety data sheetAkvi Top DS 25
 
-


Back

Counter for wood finishes

Tikkurila offers wide range of paint and lacquer systems for different wood industries. Tikkurila cost comparison program calculates costs and helps to find the best solution for your project.

VOC counter for wood finishes

Tikkurila VOC calculation program is based on VOC Directive 1999/13/EC valid in the whole EC area, which is aimed to reduce VOC emissions in different industrial activities. The calculation program is meant to be used as a preliminary mapping of solvent emissions.