PRODUCT DATA SHEET
Dicco Crystal 30 White - Acid-catalyzed paint
|DESCRIPTION||A two-component acid-catalyzed paint.|
A fast-drying, durable paint with good filling properties for interior use.
|Recommended uses||Suitable for furniture, doors and other MDF and wooden surfaces. Especially suitable for fast production lines.|
|Features||Long lasting bright white color.
Thixotropic paint with good hiding properties.
Contains no aromatic solvents.
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
|Thinner||1035 and 1058|
|Mixing ratio||Paint 100 parts by volume 950 6535
Hardener 10 parts by volume 006 2098
|Application method||Airless spraying, air-assisted airless spraying and conventional spraying.|
|Pot-life (+23°C)||24 hours|
Stacking temperature below +35ºC. Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
|Solids volume||51±2% by volume, 68±2% by weight|
|Application conditions||The surface to be painted has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the paint has to be over +18ºC and the relative humidity of the air below 70%.|
|Preparation||Wood surfaces must be sanded with sanding paper P150–240. Sanding between primer and top coat can be done with sanding paper P240–400. All sanding dust must be removed before painting.|
|Priming||Diccoplast Primer and Diccoplast Plus Tix.|
|Application||For airless spraying, the product is thinned approximately 15–25% to the viscosity 20-40s (DIN4). Recommended nozzle tip is 0.011"–0.015" and pressure 80–140 bar. Spray angle shall be chosen according to the shape of the object.
For air assisted airless spraying, the product is thinned approximately 15–25% to the viscosity 25–50s (DIN4). Recommended nozzle tip is 0.011"–0.015" and pressure 40–120 bar. Atomising air pressure should be about 1–3 bar. Spray angle shall be chosen according to the shape of the object.
For conventional spraying, the product is thinned approximately 15–25% to the viscosity 20–25s (DIN4). Recommended nozzle tip is 1.4–1.8 mm and the nozzle pressure 2–3 bar.
|Mixing of components||Stir the paint carefully before use. Add 10 volume- % of Hardener 006 2098. Thin the paint to the viscosity required.
Do not use iron containers as mixing container. Instead use plastic, enamel or acid resistant steel containers.
|Cleaning of tools||Thinner 1035 or 1058.|
|EU VOC 2004/42/EC-limit value||The Volatile Organic Compounds amount is 420 g/litre of paint.
Maximum VOC content in ready to use paint (thinned 25% by volume) is 510 g/l.
For industrial use only.
|HEALTH AND SAFETY LABELLING|
according to Regulation (EC) No. 1272/2008
|Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. If you have any questions about this product, please go to web site www.tikkurila.com/industrial_coatings or send an e-mail to firstname.lastname@example.org.|
|Safety data sheet||Dicco Crystal 30 White|
|Thinner safety data sheet||Dicco Crystal 30 White|
|Hardener safety data sheet||Dicco Crystal 30 White|