Working instructions
Product data sheet
Paint calculator
Safety Data Sheets

Diccoplast Plus TIX

A two-component acid-catalyzed primer for interior surfaces.

The paint is solvent-borne
The coverage of the paint on rough surfaces
The coverage of the paint on smooth surfaces

Thixotropic paint with excellent filling properties

Diccoplast Plus TIX is used for vertical application, because it is a thixotropic primer and it has not a tendency to sag, when applied on vertical surfaces. The primer has excellent filling properties.

Aromatic solvent free

Diccoplast Plus TIX does not contain aromatic solvents and it is easy to sand.

Diccoplast Plus TIX is mostly used for:

Stain, lacquer and paint systems for wood industries


Diccoplast Plus Tix - Acid-catalyzed primer

Diccoplast Plus Tix
DESCRIPTION A two-component acid-catalyzed primer.

A fast drying, thixotropic paint for interior use.

Good filling and sanding properties.

Recommended uses Recommended for furniture, doors and other interior wooden and fibre board surfaces.

Features Thixotropic. Does not contain aromatic solvents.
Colour Range White.
Gloss groups Matt
Emission classification The emission level of this product fulfils the requirements of E1 classification for surface treatment materials. The product has been tested according to the standard EN 717-1, and its formaldehyde emission rate is less than 0.124 mg/m3 air.

Recommended spreading amounts (unthinned)

Theoretical coverage




40–50 µm

100–120 g/m2

11–14 m2/l


Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.

Thinner 1027 and 1033
Mixing ratio Base 100 parts by volume 007 5334
Hardener 10 parts by volume 006 2098
Application method

Airless application with the viscosity 25–50 s (DIN 4) can be reached with approximately 5–20 % of thinning. Nozzle tip 0.011"–0.015" and the nozzle pressure 80–180 bar. Spray angle shall be chosen according to the shape of the object.


Air assisted airless application with the viscosity 25–50 s (DIN 4) can be reached with approximately 5–20 % of thinning. Nozzle tip 0.011"–0.015" and the nozzle pressure 40–120 bar. Atomising air pressure should be about 1–3 bar. Spray angle shall be chosen according to the shape of the object.


Conventional application with the viscosity 20–50 s (DIN 4) can be reached with approximately 10–20 % thinning. Nozzle tip 1.4–1.8 mm and the nozzle pressure

2–3 bar.
Pot-life (+23°C) 48 hours.
Drying times

100120 g/m²


+23 ºC

+50 ºC

Dry to touch, after

20–30 min

8–15 min

Dry to sand, after

1–2 h

30–40 min


Stacking temperature below+ 35 ºC.


Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume 57±2 % by volume
73±2 % by weight
Density 1.4 kg / litre
Product code 007 5334

Application conditions The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the primer has to be over 18 ºC and the relative humidity of the air below 70 %.
Preparation Wood material must be sanded with sanding paper P150–240. Sanding between primer and top coat can be done with sanding paper P240–400. All sanding dust must be removed with f.ex. air exhauster.
Painting Diccoplast 30, Diccoplast 80, Diccoplast 30 Tix and Dicco Flex.
Mixing of components Stir the paint carefullybefore use. Add 10 % by volume Hardener 006 2098 and mix again carefully. Thin the paint to the viscosity required with Thinner 1027 or 1033.

Do not use iron containers as mixing container. Instead use plastic, enamel or acid resistant steel containers.
Cleaning of tools Thinner 1027 or 1033.
EU VOC 2004/42/EC-limit value The Volatile Organic Compounds amount is 390 g/litre of paint.
Maximum VOC content in ready to use paint (thinned 30 % by volume) is 490 g/l.
VOC 2004/42/EC (catA/j) 500 g/l (2010)

according to Regulation (EC) No. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial and professional use only.
Safety data sheetDiccoplast Plus Tix
Thinner safety data sheetDiccoplast Plus Tix
Hardener safety data sheetDiccoplast Plus Tix


Counter for wood finishes

Tikkurila offers wide range of paint and lacquer systems for different wood industries. Tikkurila cost comparison program calculates costs and helps to find the best solution for your project.

VOC counter for wood finishes

Tikkurila VOC calculation program is based on VOC Directive 1999/13/EC valid in the whole EC area, which is aimed to reduce VOC emissions in different industrial activities. The calculation program is meant to be used as a preliminary mapping of solvent emissions.