Fontelac QD 80 - One-component glossy topcoat for low-VOC demands
Fontelac QD 80A water-borne, one-component glossy topcoat based on an alkyd dispersion. Glossy finish for metal industry and painting stations, when low VOC is required.
Good gloss and color retention
Fontelac QD 80 forms a glossy beautiful surface with good gloss and color retention.
Wide range of colors
Topcoat is available in a wide range of colors. Especially used as a glossy finish for small tanks, agricultural machinery, haulage equipment and other machinery and equipment.
Fontelac QD 80 is mostly used for
Do you need more information? Please contact our technical staff to get more information or advice >>
PRODUCT DATA SHEET
Fontelac QD 80 - Water-borne alkyd topcoat
|DESCRIPTION||A water-borne, one-component glossy topcoat based on an alkyd dispersion.|
|PRODUCT FEATURES||Suitable for product painting in metal industry and for painting stations. Not suitable for immersion or constant humidity.|
|Recommended uses||Recommended especially as a glossy finish for small tanks, agricultural machinery, haulage equipment and other machinery and equipment.|
|Features||Good gloss and colour retention in climatic stress.|
|Colour Cards||TEMASPEED FONTE tinting.|
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
|Application method||By spray, brush or dipping.|
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
|Solids volume||40 ± 2 volume % (ISO 3233)
52 ± 2 weight %
|Density||1,2 ± 0,1 kg/l|
|Application conditions||All surfaces must be dry. The temperature of the ambient air, surface and paint should not fall below +10 ºC during application or drying. Relative humidity should not exceed 70 %. The surface temperature of the steel should remain at least 3 ºC above the dew point.|
|Preparation||Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)|
|Priming||FONTECRYL 10, FONTECRYL AP, FONTECRYL 25, TEMAPRIME EE, TEMAPRIME EUR and TEMAPRIME GF.|
|Finishing||FONTELAC QD 80.|
|Painting||By spray, brush or dipping. Depending on the application method the paint can be thinned 0 - 5 %. Airless spray nozzle tip 0.011" - 0.013" and nozzle pressure 120 - 180 bar. Spray angle shall be chosen according to the shape of the object.|
|Cleaning of tools||Water or FONTECLEAN 1921. The equipment must be cleaned immediately after use before the paint dries.|
|EU VOC 2004/42/EC-limit value||The Volatile Organic Compounds amount is 87g/litre of paint.
VOC content of the paint (thinned 5% by volume) is 85 g/litre.
|HEALTH AND SAFETY LABELLING|
according to Regulation (EC) No. 1272/2008
|Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.|
|Safety data sheet||Fontelac QD 80|