Pinja Color Plus - Extended maintenance interval up to 10 years
Pinja Color PlusA water-borne tintable acrylate semi-transparent wood stain with remarkably longer maintenance interval.
Exceptionally high UV and weather resistance
Pinja Color Plus is a high-solid wood stain, which can provide you with a maintenance interval twice as long as traditional wood stain. The product creates a satin smooth surface and protects wood against moisture, sunlight, surface mold and dirt, preventing the cracking of wood.
Wide range of colors
Pinja Color Plus has two different bases: EPP-colorless and OPL tintable with Avatint colorants. The OPL base contains yellow and red oxide transparent pigments, which provide better resistance to sunlight and thereby a longer maintenance interval.
10 deeper and natural looking colors
Using Super Color tinting technology you can achieve deeper and more durable colors. The Tikkurila Super Colors color card contains 10 intensive shades, which are based on yellow and red transparent pigments.
Explore 10 intensive shades of Super Colors card
|Super Colors - Extended maintenance interval and deep translucent bright colors|
|Super Color shades are based on yellow and red iron oxide pigments which enable warm, natural earthy shades in this color range. The size of transparent color pigment particles is only a tenth of ordinary color pigments, which enhances transparency and thus provides better resistance to sun light and longer maintenance interval. Super Colors color card|
Read more about Pinja Color Plus
|Pinja Color Plus - Longer maintenance interval|
|The water-borne, Pinja Color Plus, semi-transparent tintable stain has been developed for the industrial application. This high-solid wood stain can provide you with a maintenance interval of up to 10 years. Pinja_Color_Plus|
Pinja Color Plus is widely used for:
Do you need more information? Please contact our technical staff to get more information or advice >>
PRODUCT DATA SHEET
Pinja Color Plus - Water-borne stain
|DESCRIPTION||A water-borne tintable semi-transparent wood stain. The binder of the product is an acrylate.|
Protects the surface against moisture, sunlight and dirt. Decreases cracking of wood surface.
“Super Colors” color card with intensive and warm, ablazing transparent colors.
|Recommended uses||Recommended for timber cladding, window frames, front doors, fencing and other wooden surfaces outdoors. Suitable for planed and sawn wood surfaces and for impregnated and thermally modified wood. Suitable also for lamelled logs.|
|Features||Provide remarkably longer maintenance interval.
A flexible exterior wood stain, which forms semi-transparent film.
|Colour Cards||All the shades from the Super Color and Valtti color cards.
Avatint tinting system. Always use a tinted product. Note that whitish colors are not recommended for woods that have resin-bleeding tendency (for instance oak). Wood resin can change the original shade.
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
|Application method||Airless spraying and air-assisted airless spraying.|
Stacking temperature of the painted object below +30ºC.
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
|Solids volume||28±2% by volume
30±2% by weight
|Density||1.0 kg /litre (clear)|
|Application conditions||The surface to be treated has to be clean and dry. The moisture content of wood has to be below 20%. During application and drying temperature of the air, substrate and paint must be over +5°C and relative humidity of the air below 80%. Good ventilation is required to ensure optimal result. Product can be dried with or without oven.|
|Preparation||Clean surfaces from dirt, dust and loose material. Assure that surface is free from mould and blue stain.|
|Priming||Pinja Wood Stain.|
|Diluting||Paint is recommended to be used without thinning. If needed thin with water max. 5%.|
|Staining||Stir the product carefully before use. The product is ready for use.
For airless spraying, recommended nozzle tip is 0.009"–0.011" and pressure 80-160 bar. Spray angle shall be chosen according to the shape of the object.
For air-assisted airless spraying, recommended nozzle tip is 0.009"–0.011" and pressure 40–120 bar. Atomising air pressure should be about 1–3 bar. Spray angle shall be chosen according to the shape of the object.
Wood contains resin and other colouring extractives especially in knots. Temperature and humidity fluctuations may cause paint coat discolouration in these areas.
|Cleaning of tools||Water or Tikkurila Tool Cleaner.|
|EU VOC 2004/42/EC-limit value||Maximum VOC content in ready to use mixture is 20 g/l.
|HEALTH AND SAFETY LABELLING|
according to Regulation (EC) No. 1272/2008
|Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial and professional use only.|
|Safety data sheet||PINJA COLOR PLUS|