Pinjasol Color - Best penetration into wood
Pinjasol ColorA semi-transparent wood stain for exterior surfaces.
Pinjasol Color penetrates into the wood and protects the surface against moisture, sunlight and dirt, thus decreasing cracking of wood surface.
Especially for hard wood
Pinjasol Color is widely used for different kind of exterior surfaces, especially for hard wood like oak, ash, beech, etc.
Pinjasol Color is widely used for:
Do you need more information? Please contact our technical staff to get more information or advice >>
Stain, lacquer and paint systems for wood industries
|System code||Stain||1. coat||2. coat||3. coat|
|WS11||Pinjasol Color||Merit Jahti 20, Merit Jahti 80||Merit Jahti 20, Merit Jahti 80|
Traditional, solvent-borne, urethane-alkyd lacquer system for exterior doors and windows.
|WS14||Pinjasol Color||Pinjasol Color|
Traditional, solvent-borne wood stain system for exterior surfaces. Stain is Temaspeed Premium tintable.
PRODUCT DATA SHEET
(Previous date 18.10.2014)
Pinjasol Color - Solvent-borne stain
|DESCRIPTION||A semi-transparent tintable wood stain.|
|Recommended uses||Suitable for wooden surfaces such as window frames, front doors, wall boards, log cabins etc.|
|Features||Protects the surface against moisture, sunlight and dirt. Decreases cracking of wood surface.
Gloss level of this stain cannot be defined. Pinjasol Color is absorbed into the wood and does not form a solid film.
|Colour Cards||Temaspeed Premium tinting system. Limited range of colors according to Valtti Color color card.|
8 - 10 m2/l (100 μm).
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Dip coating and airless spraying.
For airless spraying the recommended nozzle tip is 0.013"–0.015" and pressure
120–180 bar. Spray angle shall be chosen according to the shape of the object.
If needed product can be thinned up to 10% with Thinner 1050.
For dip coating the product can be thinned up to 10% with Thinner 1050.
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
|Solids volume||11 % by volume
14 % by weight
|Density||0.85 kg/l (clear)|
|Product code||292 series|
|Application conditions||The surface to be coated has to be clean and dry. The moisture content of the wood should be below 20%. During application and drying the temperature of the air, the surface to be treated and the product has to be over +5ºC and the relative humidity of the air below 80%.|
Clean surface from dirt, dust and loose material. Assure that surface is free from mould and blue stain.
|Mixing of components||Stir the product carefully. The product is ready for use.|
|Cleaning of tools||Thinner 1050.|
|EU VOC 2004/42/EC-limit value||The Volatile Organic Compounds amount is 730 g/l.
Maximum VOC content in ready to use oil is 730 g/l.
If thinned maximum VOC content is 740 g/l.
For industrial use only.
|HEALTH AND SAFETY LABELLING|
according to Regulation (EC) No. 1272/2008
|Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj.|
|Safety data sheet||Pinjasol Color|
|Thinner safety data sheet||Pinjasol Color|