PRODUCT DATA SHEET
Temafloor Fluat - Water soluble impregnating agent
|DESCRIPTION||Crystalline, water soluble, silicon fluoride, surface impregnating agent for concrete floors.|
|PRODUCT FEATURES||Suitable for dust binding and surface hardening of unfinished old and new concrete floors.|
|Recommended uses||Recommended for e.g. warehouses and multistorey garages.|
|Features||Reacts with the calsium carbonate in the concrete surface. Does not form any film. Can be coated with Temafloor- coatings and screeds if necessary.|
|Application method||Spread with brush or spatula.|
|Product code||007 9920|
|Preparation||New concrete surface must be dry and at least 2 weeks old. Remove laitance by power grinding.
Old concrete floors should be cleaned and grinded thoroughly.
|Treatment||1st treatment: Pour the solution over the clean surface and spread it with brush or spatula so that the whole surface is covered. Let the solution lay on the surface at least 3 hours by brushing the surface at the same time.
After the treatment rinse the surface with plenty of water. Let the surface dry at least one day before the following treatment.
2nd treatment: The second treatment is carried out in the same way as the first treatment. Rinse the surface after the treatment with plenty of water and brush powerfully. Do no allow the surface to dry before the rinsing. Insufficient rinsing and brushing may cause a dustlike coat of unreacted additive on the floor. The floor is ready for use immediately when the surface has dried.
|EU VOC 2004/42/EC-limit value||Does not contain Volatile Organic Compounds.|
|HEALTH AND SAFETY LABELLING|
according to Regulation (EC) No. 1272/2008
|Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For professional use only.|
|Safety data sheet||Temafloor Fluat|