Water-borne, semi-matt dispersion paint for interior painting.
Suitable for painting of new and already treated concrete, plaster, filler, plasterboard, chipboard and wood fibreboard surfaces according to instructions.
Walls and ceilings in dry interior premises, e.g. living rooms, kitchens, offices and public spaces exposed to light wear.
Light colours tinted according to Tikkurila Symphony 2436 colour card.
Building material emission class
For absorbing surfaces 5-7 m²/l. For non-absorbing surfaces 9-11 m²/l.
Roller, brush or spray.
- nozzle 0,017" - 0,021"
- thinning 0-10 vol.-%
Drying time at 23°C and 50% relative air humidity
Dust dry after half an hour.
Recoatable after 1-2 hours.
Wet scrub resistance
SFS-EN 13300 class II, ISO 11998.
85°C, ISO 4211-3.
Withstands cleaning chemicals and weak solvents, such as White Spirit.
approx. 36 % depending on the colour.
1.3 kg/l, ISO 2811
Protect from frost. Store in dry and cool place, protected from sunlight. Tinted paint or opened can does not withstand long-term storage. Close the lid carefully for next use.
The surface to be painted must be dry, the temperature of the air at least +5 °C, and the relative humidity of the air below 80 %.
Remove dirt and dust from the surfaces. Fill the surfaces with a suitable Tikkurila Presto or Prestonit filler, if needed, and sand the dried surface. Remove sanding dust. Prime with Siro 2 or Ykköspohja.
Previously painted surfaces:
Wash down previously painted surfaces with diluted Maalipesu cleaning detergent and rinse carefully with water. Sand hard and glossy surfaces matt and remove sanding dust. Fill cracks and holes with a suitable Tikkurila Presto or Prestonit filler and sand the dried surface. Remove sanding dust. Prime with Siro 2 or Ykköspohja, if needed.
Stir Siro 12 well before use and thin with water, if necessary. Apply 1-2 times with a roller, spray or brush.
Cleaning of tools
Remove the excess paint from tools before cleaning with water. Tikkurila Pensselipesu (Tool Cleaner) is recommended to be used for cleaning hardened paint.
Cleaning earliest approx. 1 month after painting, if needed.
The surfaces are cleaned with a dry brush or dust towel. Dirty surfaces are cleaned with a damp cleaning tool moistened in a neutral (pH 6-8) washing solution. The surface may not remain wet after cleaning. Follow the dilution instructions of the detergent manufacturer.
The product achieves its final hardness and durability after one month under normal conditions, therefore the surfaces must be handled with care during this time. If the surfaces need to be cleaned soon after finishing, clean them gently with a dry or damp cleaning cloth
Surfaces painted with Siro 12 can be recoated with same type of water-borne paint. See preparation.
EU VOC 2004/42/EC-limit value
(cat A/a) 30g/l(2010)
Siro 7 contains VOC max. 30g/l.
HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
Contains 1,2-benzisothiazol-3(2H)-one and 5-chloro-2-methyl-2H-isothiazol-3-on/ 2-methyl-2H -isothiazol-3-one (3:1). May produce an allergic reaction. Wear protective gloves.
A Safety Data Sheet is available on request
Safety data sheet
ENVIRONMENTAL and WASTE DISPOSAL
Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.
ADR: not classified
sre061113 / linla170613 / niear121113 / pih170613 / 12V-s