Temal 600 HB - Silicone-aluminium paint

Temal 600 HB
DESCRIPTION A high-build silicone-aluminium paint.
PRODUCT FEATURES Recommended for exteriors of steel structures exposed to high temperatures.
Recommended uses Suitable for fireplace doors, flues, exhaust pipes, sauna stoves and other hot metal surfaces.

Features Resistant to temperatures up to + 650 ºC dry heat on steel without primer and + 400 ºC when applied over a zinc silicate paint. Can be applied by airless spray equipment.
Colour Range Aluminium. Metallic lustre.

Recommended film thicknesses

Theoretical coverage




25 µm

75 µm

13.6 m2/l

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Thinner 1006
Application method By airless or conventional spray or by brush.
Drying times

DFT 25 µm

+ 10 ºC

+ 23 ºC

+ 35 ºC

Dust dry, after

30 min

15 min

10 min

Touch dry, after

2 h

1 h

30 min

Recoatable, after

3 h

2 h

1 h

Final cure and hardness will be obtained by curing at + 230 ºC, 1 h.

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume 34 ± 2 % volume (ISO 3233)
51 ± 2 % weight
Density 1.2 kg / l
Product code 006 7682

Application conditions All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below + 5 ºC during application. Relative humidity should not exceed 80 %. The surface temperature of the steel should remain at least 3 ºC above the dew point.
Preparation Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4)

Steel surfaces: Blast clean to grade Sa2½. (ISO 8501-1) If blast cleaning is not possible, phosphating is recommended for cold rolled steel to improve adhesion.

Zinc silicate surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the over-coating time of the primer. (ISO 12944-4)
Priming TEMASIL 90.
Finishing TEMAL 600 HB.
Painting By airless or conventional spray or by brush. Mix the paint thoroughly before use. Depending on the application method the paint can be thinned 0 - 10 %. Airless spray nozzle tip 0.011" - 0.013" and nozzle pressure 120 - 160 bar. Spray angle shall be chosen according to the shape of the object.
Cleaning of tools Thinner 1006.
EU VOC 2004/42/EC-limit value The Volatile Organic Compounds amount is 565 g/litre of paint.
VOC of the paint (thinned 10 % by volume) is 595 g/l.
For industrial use only.

according to Regulation (EC) No. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj.
Safety data sheetTemal 600 HB
Thinner safety data sheetTemal 600 HB