PRODUCT DATA SHEET
Temalac FD 20 - Alkyd paint
|DESCRIPTION||A fast-drying, one-component semi-matt anti-corrosive single-coat alkyd paint.|
|PRODUCT FEATURES||Recommended to be used as a single coat system for steel surfaces. Good application properties. Ideal for use in machine shops with fast production cycles. May also be used as a primer in alkyd based paint systems.|
|Recommended uses||Steel surfaces.|
|Features||Good application properties.|
|Colour Cards||RAL, NCS, SSG, BS, MONICOLOR NOVA and SYMPHONY colour cards. TEMASPEED tinting.|
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
|Thinner||1006 and 1053|
|Application method||By airless spray.|
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
|Solids volume||50 ± 2 % volume (ISO 3233)
64 ± 2 % weight
|Density||1.1 - 1.3 kg / l depending on colour|
|Application conditions||All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below + 5 ºC during application or drying. Relative humidity should not exceed 80 %. The surface temperature of the steel should remain at least 3 ºC above the dew point.|
|Preparation||Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4)
Steel surfaces: Blast clean to grade Sa2½. (ISO 8501-1) If blast cleaning is not possible, phosphating is recommended for cold rolled steel to improve adhesion.
Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)
|Priming||Temalac FD 20, Temaprime EE, Temaprime EUR, Temaprime GF and Temaprime ML.|
|Finishing||Temalac FD 20, Temalac FD 50, Temalac FD 80, Temalac AB 70 and Temalac ML 90.|
|Painting||By airless spray. Mix the paint thoroughly before use. At airless spray application the paint should be thinned 5 - 15 %. Airless spray nozzle tip 0.011" - 0.015" and nozzle pressure 120 - 180 bar. Spray angle shall be chosen according to the shape of the object. For large surfaces use Thinner 1053 (slow).|
|Cleaning of tools||Thinner 1006.|
|EU VOC 2004/42/EC-limit value||The Volatile Organic Compounds amount is 440 g/litre of paint.
VOC content of the paint (thinned 15 % by volume) is 495 g/l.
|HEALTH AND SAFETY LABELLING|
according to Regulation (EC) No. 1272/2008
|Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj.|
|Safety data sheet||Temalac FD 20|
|Thinner safety data sheet||Temalac FD 20|