PRODUCT DATA SHEET
Temathane 50 - Polyurethane paint
|DESCRIPTION||A two-component, semi-gloss polyurethane paint, hardener aliphatic isocyanate.|
|PRODUCT FEATURES||Recommended to be used as a semigloss topcoat for epoxy and polyurethane systems exposed to weathering.|
|Recommended uses||Recommended for painting of outside of storage tanks, steel buildings and other steelwork.|
|Features||Excellent weathering and abrasion resistance.
A durable, easy to clean and non-chalking topcoat with good gloss and colour retention.
|Colour Cards||RAL, NCS, SSG, BS, MONICOLOR NOVA, SYMPHONY, TEMASPEED Tinting|
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
|Thinner||1048, 1067 and 1061|
|Mixing ratio||Base 9 parts by volume 514-series
Hardener 1 part by volume 008 7620
|Pot-life (+23°C)||4 hours.|
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
|Solids volume||55±2% volume (ISO 3233)
|Density||1.2 ± 0.1 kg / l (mixed)|
|Application conditions||All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below +5ºC during application or drying. Relative humidity should not exceed 80%. The surface temperature of the steel should remain at least 3ºC above the dew point.|
|Preparation||Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)|
|Priming||Temacoat GPL-S Primer, Temacoat GPL-S MIO, Temacoat RM 40, Temacoat SPA, Temabond and Temadur 20.|
|Finishing||Temathane and Temadur.|
|Painting||By airless or conventional spray or by brush. In order to obtain an even, non-porous finish, spray a misty coat: first a thin layer, then let the solvents evaporate for
5–30 minutes and then apply the full coat. Depending on the application method and the temperature of the components (base, hardener, thinner) the paint can be thinned 10–15 %. The viscosity should be 30–60 s DIN4. Airless spray nozzle tip 0.011"–0.015" and nozzle pressure 120–160 bar. Spray angle shall be chosen according to the shape of the object.
At conventional spraying the viscosity should be 20–25 s DIN4.
At brush application the paint should be thinned according to the circumstancies.
|Mixing of components||First stir base and hardener separately. The correct proportions of base and hardener must be mixed thoroughly before use. Use Temaspeed Squirrel Mixer for mixing.|
|Cleaning of tools||Thinner 1048, 1067 or 1061.|
|EU VOC 2004/42/EC-limit value||The Volatile Organic Compounds amount is 425 g/litre of paint mixture.
VOC content of the paint mixture (thinned 15% by volume) is 490 g/l.
|HEALTH AND SAFETY LABELLING|
according to Regulation (EC) No. 1272/2008
|Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj|
|Safety data sheet||Temathane 50|
|Thinner safety data sheet||Temathane 50|
|Hardener safety data sheet||Temathane 50|