Fontecryl SC 50 - Water-borne acrylic paint

Fontecryl SC50
DESCRIPTION A water-borne, one-component fast-drying alkyd modified acrylic paint which contains active anti-corrosive pigments.

Suitable for product painting in metal industry and painting stations. Recommended especially as a single coat paint system for steel structures indoors and outdoors. Drying times can be shortened by using higher temperatures.

Recommended uses Typical uses are e.g. steel frameworks, machinery and equipment.

Colour Cards TEMASPEED FONTE tinting.
Gloss groups Semi-gloss

Recommended film thicknesses

Theoretical coverage




40 µm

100 µm

10.0 m2/l

80 µm

200 µm

5.0 m2/l

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Thinner Water
Application method By conventional or airless spay.
Drying times

DFT 80 µm

+ 15 ºC

+ 23 ºC

+ 60 ºC

Dust dry, after

1½ h

30 min

5 min

Touch dry, after


1 ½ h

15 min

Recoatable with the product itself

No limitations

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume 40 ± 2 volume % (ISO 3233)
50 ± 2 weight %
Density 1.2 ± 0.1 kg/l .
Product code 624 -series

Application conditions All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below +15ºC during application or drying. Relative humidity should be between
20 - 70%. The surface temperature of the steel should remain at least 3ºC above the dew point.
Preparation Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4)

Steel surfaces: Blast clean to grade Sa2½. (ISO 8501-1) If blast cleaning is not possible, phosphating is recommended for cold rolled steel to improve adhesion.

Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)
Priming Fontecryl 10, Fontecryl AP.
Finishing Fontecryl SC 50.
Painting By conventional or airless spay. The application method the paint can be thinned
0 - 10%. Airless spray nozzle tip 0.011" - 0.015" and nozzle pressure 120 - 160 bar. Spray angle shall be chosen according to the shape of the object.
Cleaning of tools Water or Fonteclean 1921. The equipment must be cleaned immediately after use before the paint dries.
EU VOC 2004/42/EC-limit value The Volatile Organic Compounds amount is 40 g/litre of paint.
VOC content in paint (thinned 10 % by volume) is 35 g/l.

according to Regulation (EC) No. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For professional use only.
Safety data sheetFontecryl SC 50