PRODUCT DATA SHEET
Akvilac Tix 25 - Acrylate lacquer
|DESCRIPTION||A water-borne, one-component acrylate lacquer.|
A thixotropic water-borne lacquer with very good wetting properties.
Lacquer film is very clear and on top of dark stain colours final outlook of the lacquer is similar to solvent-borne polyurethane lacquer.
A fast drying lacquer and easy to apply also in vertical position.
|Recommended uses||Suitable for chairs, furniture, doors, mouldings and other wooden surfaces.|
|Colour Range||Temaspeed Akvi Tone -tinting.|
|Colour Cards||Shades from the Akvicolor AT colour cards and several colours by request.|
|Building material emission class||M1|
|Emission classification||The M1 classification for low-emitting building materials has been granted by the Finnish Building Information Foundation RTS.|
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Airless spraying, air-assisted airless spraying and conventional spraying.
Application (+23 °C)
Airless spraying application viscosity can be reached with approximately 0–10 % of thinning by volume. Recommended nozzle tip is 0.011"–0.015" and pressure 100–160 bar. Spray angle shall be chosen according to the shape of the object.
Air assisted airless spraying application viscosity can be reached with approximately 0–10 % of thinning by volume. Recommended nozzle tip is 0.011"–0.015" and pressure 40–120 bar. Atomising air pressure should be about 1–3 bar. Spray angle shall be chosen according to the shape of the object.
Conventional spraying application viscosity can be reached with approximately 0–10 % thinning by volume. Recommended nozzle tip is 1.4–1.8 mm and pressure 2–3 bar.
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
|Solids volume||Volume solids 30±2%
Weight solids 32±2%
|Product code||448 6909|
|Application conditions||The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the lacquer has to be over +18ºC and the relative humidity of the air below 70%. Good ventilation is needed during drying process.|
|Preparation||Wood surfaces should be sanded with sandpaper P150–240. Primed surfaces should be sanded with sandpaper P240–600. All sanding dust must be removed before lacquering.|
|Mixing of components||Stir the lacquer carefully before use. Avoid flotation. Thin with water to the viscosity required.|
|Cleaning of tools||Water.|
|EU VOC 2004/42/EC-limit value||The Volatile Organic Compounds amount is 85 g/litre of paint mixture.
VOC content of the paint mixture (thinned 5 % by volume) is 100 g/l.
VOC 2004/42/EC (cat A/e ) 130 g/l (2010)
|HEALTH AND SAFETY LABELLING|
according to Regulation (EC) No. 1272/2008
|Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial and professional use only.|
|Safety data sheet||Akvilac Tix 25|