PRODUCT DATA SHEET
Pinja W-Oil - Water-borne wood stain
|DESCRIPTION||A water-borne tintable semi-transparent wood stain.|
Suitable for exterior panels, boards and log cabins in humid premises outdoors.
|Recommended uses||Protects the surface against moisture, sunlight and dirt. Delay water penetration into wood and therefore decreases cracking of wood surfaces.|
|Features||Fast-drying wood stain.|
|Colour Range||Temaspeed Akvi Tone tinting system.|
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
|Application method||For airless spraying the recommended nozzle tip is 0.009"–0.011" and pressure 80–160 bar. Spray angle shall be chosen according to the shape of the object.
For air–assisted airless spraying the recommended nozzle tip is 0.009"–0.011" and pressure 40–120 bar. Atomising air pressure should be about 1–3 bar. Spray angle shall be chosen according to the shape of the object.
For conventional spraying the recommended nozzle tip is 1.0–1.4 mm and pressure 1.5–3.0 bar.
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
|Solids volume||app. 10% by volume, 11% by weight.|
|Product code||394 6909|
|Application conditions||The surface to be treated must be clean and dry. During application and drying the temperature of the air, the surface to be treated and the oil has to be over +18ºC and the relative humidity of the air below 80%.
Note that Pinja W-Oil is not suitable for wooden surfaces treated previously with solvent borne wood oil.
|Treatment||Stir the oil carefully and thin with water if necessary. To get a more even result the surface can be polished.|
|Surface treatment||Untreated surfaces:
Clean surface from dirt, dust and loose material. Wash mouldy surfaces with Tikkurila Mould Removal or Tehopesu Super Clean according to the instructions.
|Mixing of components||Stir the oil carefully and thin with water if necessary. To get a more even result the surface can be polished.|
|Cleaning of tools||Water.|
|EU VOC 2004/42/EC-limit value||The Volatile Organic Compounds amount is 38 g/litre of oil.
|HEALTH AND SAFETY LABELLING|
according to Regulation (EC) No. 1272/2008
|Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For professional use only.|
|Safety data sheet||Pinja W-Oil|