PRODUCT DATA SHEET
Dicco Astral 35 - Acid-catalyzed paint
|DESCRIPTION||A two-component acid-catalyzed paint.|
A fast-drying, durable paint with good filling properties for interior use.
|Recommended uses||Suitable for furniture, doors and other wooden and fibreboard interior surfaces. Especially suitable for fast production lines.|
|Colour Range||Wide range of colors.|
|Colour Cards||Temaspeed Premium tinting.|
|Gloss measurement standard||ISO 2813/60º|
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
|Thinner||1035 and 1058|
|Mixing ratio||Paint 100 parts by volume 629-series
Hardener 14 parts by volume 006 2098
|Application method||Airless spraying, air-assisted airless spraying, conventional spraying and curtain coating.|
|Pot-life (+23°C)||48 hours.|
Stacking temperature below +35ºC.
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
|Solids volume||Volume solids 58±2%
Weight solids 69±2%
|Density||1.2 ±0,2% kg/l|
|Product code||Paint 629-series, hardener 006 2098.|
|Application conditions||The surface to be painted has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the paint has to be over +18ºC and the relative humidity of the air below 70%.|
|Preparation||Wood surfaces must be sanded with sanding paper P150–240. Sanding between primer and top coat can be done with sanding paper P240–400. All sanding dust must be removed before painting.|
|Priming||Diccoplast Primer and Dicco Surf.|
|Application||For airless spraying, the product is thinned approximately 10–20% to the viscosity
20–40s (DIN4). Recommended nozzle tip is 0.011"–0.015" and pressure 80–140 bar. Spray angle shall be chosen according to the shape of the object.
For air assisted airless spraying, the product is thinned approximately 5–20% to the viscosity 25–50s (DIN4). Recommended nozzle tip is 0.011"–0.015" and pressure
40–120 bar. Atomising pressure should be about 1-3 bar. Spray angle shall be chosen according to the shape of the object.
For conventional spraying, the product is thinned approximately 5–10% to the viscosity 40–60s (DIN4). Recommended nozzle tip is 1.4–1.8 mm and nozzle pressure 2–3 bar.
For curtain coating the product is thinned approximately 5–10% to the viscosity
40–60s (DIN4). Avoid too high pumping pressure and flowing speed.
|Mixing of components||Stir the paint carefully before use. Add 14 volume-% of Hardener 006 2098. Thin the paint to the viscosity required with Thinner 1035 or 1058.
Do not use iron containers as mixing container. Instead use plastic, enamel or acid resistant steel containers.
|Cleaning of tools||Thinner 1035 or 1058.|
|EU VOC 2004/42/EC-limit value||The Volatile Organic Compounds amount is 370 g/litre of paint.
Maximum VOC content in ready to use paint (thinned 20% by volume) is 463 g/l.
VOC 2004/42/EC (catA/j) 500 g/l (2010).
|HEALTH AND SAFETY LABELLING|
according to Regulation (EC) No. 1272/2008
|Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. If you have any questions about this product, please go to web site www.tikkurila.com/industrial_coatings or send an e-mail to email@example.com. For industrial and professional use only.|
|Safety data sheet||Dicco Astral 35|
|Thinner safety data sheet||Dicco Astral 35|
|Hardener safety data sheet||Dicco Astral 35|