PRODUCT DATA SHEET
Dicco Crystal 30 White - Acid-catalyzed paint
|DESCRIPTION||A two-component acid-catalyzed paint.|
A fast-drying, durable paint for interior use.
|Recommended uses||Suitable for furniture, doors and other MDF and wooden surfaces. Especially suitable for fast production lines.|
|Features||Excellent white retention, long lasting bright white color.
As easy to use as traditional acid-catalyzed products.
Excellent hiding power.
Thixotropic paint with good filling properties.
Contains no aromatic solvents.
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
|Thinner||1035 and 1058|
|Mixing ratio||Paint 100 parts by volume 007 5866
Hardener 10 parts by volume 006 2098
|Application method||Airless spraying, air-assisted airless spraying and conventional spraying.|
|Pot-life (+23°C)||24 hours|
Stacking temperature below +35ºC.
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
|Solids volume||51±2% by volume, 68±2% by weight|
|Product code||Paint part 007 5866 and hardener 006 2098.|
|Application conditions||The surface to be treated has to be clean and dry. The moisture content of wood has to be below 20%. During application and drying temperature of the air, substrate and paint must be over +18ºC and relative humidity of the air below 70%. Good ventilation is required to ensure optimal result. Product can be dried with or without oven.|
|Preparation||Remove dust, loose particles and other impurities from the surface. Wood surfaces must be sanded with sandpaper P150–240. Sanding prior to the next application with sandpaper P240–400. All sanding dust must be removed.|
|Priming||Diccoplast Primer and Diccoplast Plus Tix.|
|Application||For airless spraying, the product is thinned approximately 15–25% to the viscosity 20-40s (DIN4). Recommended nozzle tip is 0.011"–0.015" and pressure 80–140 bar. Spray angle shall be chosen according to the shape of the object.
For air assisted airless spraying, the product is thinned approximately 15–25% to the viscosity 25–50s (DIN4). Recommended nozzle tip is 0.011"–0.015" and pressure 40–120 bar. Atomising air pressure should be about 1–3 bar. Spray angle shall be chosen according to the shape of the object.
For conventional spraying, the product is thinned approximately 15–25% to the viscosity 20–25s (DIN4). Recommended nozzle tip is 1.4–1.8 mm and the nozzle pressure 2–3 bar.
|Mixing of components||First stir base and hardener separately. The correct proportions of base and hardener must be mixed thoroughly before use. Use power mixer for mixing. Insufficient mixing or incorrect mixing ratio will result in uneven drying of the surface and weaken the properties of the coating.
Do not use iron containers as mixing container. Instead use plastic, enamel or acid resistant steel containers.
|Cleaning of tools||Thinner 1035 or 1058.|
|EU VOC 2004/42/EC-limit value||The Volatile Organic Compounds amount is 420 g/litre of paint.
Maximum VOC content in ready to use paint (thinned 25% by volume) is 510 g/l.
For industrial use only.
|HEALTH AND SAFETY LABELLING|
according to Regulation (EC) No. 1272/2008
|Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. If you have any questions about this product, please go to web site www.tikkurila.com/industrial_coatings or send an e-mail to firstname.lastname@example.org.|
|Safety data sheet||Dicco Crystal 30 White|
|Thinner safety data sheet||Dicco Crystal 30 White|
|Hardener safety data sheet||Dicco Crystal 30 White|