Luminol 25 N - UV-curing water-borne paint

Luminol 25 N
DESCRIPTION UV-curing, water-borne urethane polyester paint.
PRODUCT FEATURES Wooden surfaces indoors. Good abrasion and chemical resistance.
Recommended uses Recommended for furniture, doors of kitchen fittings and other wooden surfaces indoors.

Colour Range White (NCS S 0502-Y). Other colors by request.
Gloss groups Semi-matt
Gloss measurement standard ISO 2813/60º

8 - 10 m2/l (100 μm).

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Thinner Water
Application method

Application technique

Viscosity DIN4

Low pressure spraying

40 - 60 s

Airmix or airless spraying

40 - 60 s

Drying times (90 - 110 g/m2)

Dry to stack immediately after UV curing.

Flash-off 1 min / 23 ºC + 5 min / 50 ºC before UV-curing.

Flash-off time depends on the temperature and the efficiency of the ventilation.

Required UV-energy: 500 mJ/cm2 + 500 mJ/cm2. For proper curing of thicker layers, use both Gallium and Mercury lamps in UV-curing.
Solids volume abt. 35 % by volume, 48 % by weight.
Density 1.2 kg/litre
Product code 960 7162 (White), 960 7087 (NCS S 0502-Y)

Application conditions The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the paint has to be over 18 ºC and the relative humidity of the air below 70 %.
Painting Stir the paint carefully before use. Thin with water to the viscosity required.
EU VOC 2004/42/EC-limit value The Volatile Organic Compounds amount to 4 g/litre of paint.

according to Regulation (EC) No. 1272/2008
Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial and professional use only.
Safety data sheetLuminol 25 N