PRODUCT DATA SHEET
Pinjadur 30 - Water-borne PU topcoat - NEW!
|DESCRIPTION||A two-component, water-borne polyurethane topcoat.|
|PRODUCT FEATURES||For fibre-cement flat sheet and wooden surfaces in exterior premises.|
|Recommended uses||Recommended for furniture, windows, exterior doors and other wooden exterior surfaces.|
|Features||A durable, easy to clean and non-chalking topcoat
Excellent gloss and color retention in climatic stress.
Can be cured at higher temperatures.
|Colour Cards||RAL, NCS, SSG, BS, MONICOLOR NOVA and SYMPHONY color cards. Temaspeed Fonte tinting.|
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
|Mixing ratio||Base 4 parts by volume 33V-series
Hardener 1 part by volume 008 7606
|Application method||Air-assisted airless spraying and conventional spraying.|
|Pot-life (+23°C)||2 hours.|
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
|Solids volume||43 ± 2% volume
58 ± 2% weight.
|Density||Approx. 1.3 kg / l mixture.|
|Product code||Base paint 33V-series, hardener 008 7606.|
|Application conditions||All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below +15ºC during application or drying. Relative humidity should not exceed 80%.|
|Preparation||Wood surfaces must be sanded with sanding paper P150–240. Sanding between primer and top coat can be done with sanding paper P240–400. All sanding dust must be removed before painting.|
|Priming||Recommended primers: Akvi Primer, Akvi Primer J, Akvi Primer Pro, Fontecoat EP 50 and Pinjadur Primer.|
|Painting||For air-assisted airless spraying, the product is thinned approximately 0–10% to the viscosity 30–70 s (DIN4). Recommended nozzle tip is 0.011"–0.013" and pressure 160–200 bar. Atomising air pressure should be about 1–2 bar. Spray angle shall be chosen according to the shape of the object.
For conventional spraying, the product is thinned approximately 3–10% to the viscosity 30–50s (DIN4). Recommended nozzle tip is 1.4–1.8 mm mm and pressure
|Treatment||Recommended topcoat: Pinjadur 30.|
|Mixing of components||Stir the paint carefully before use. Add 1 part by volume Hardener 008 7606 and mix again carefully. Thin the paint to the viscosity required with water.|
|EU VOC 2004/42/EC-limit value||The Volatile Organic Compounds amount is 140 g/litre of paint.
VOC content in paint (mixed 10% of water) is 127 g/litre of paint.
|HEALTH AND SAFETY LABELLING|
according to Regulation (EC) No. 1272/2008
|Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. Only for industrial and professional use. If you have any questions about this product, please go to web site www.tikkurila.com or send an e-mail to firstname.lastname@example.org.|
|Safety data sheet||Pinjadur 30|
|Hardener safety data sheet||Pinjadur 30|