Putty Pine - Water-borne filler

Putty Pine
DESCRIPTION A water-borne filler for wooden surfaces.
PRODUCT FEATURES For filling holes in interior wooden surfaces such as fibre boards, solid wood or veneer.
Recommended uses Recommended for furniture, doors, panel walls and ceilings.

Colour Range Pine.
Gloss groups Matt

Practical coverage depends on the application method, conditions and the shape and roughness of the surface to be treated.

Thinner Water
Application method By spatula or mechanically.
Drying times

Thin filling layer can be sanded after 4 hours and deeper filling layer after 24 hours.

Solids volume 65±2 % by volume, 83±2 % by weight.
Density 2,0 ± 0,2 kg/ kg/litre
Product code 007 2087

Application conditions The surface to be treated must be dry, the temperature of the air at least +5ºC and the relative humidity of the air below 80%.
Preparation Remove dirt from the surface. Brush away dust and loose material.

Application Apply putty with a spatula or mechanically. Fill large holes preferably twice or several times. Sand the surface and remove sanding dust.
Surface treatment Can be recoated with Tikkurila's water-borne, water-borne UV and solvent-borne products.
Mixing of components Thin filler to the viscosity if needed.
Cleaning of tools Water.
EU VOC 2004/42/EC-limit value The Volatile Organic Compounds amount is 22 g/litre of putty.
VOC content of the putty (thinned 10% by volume) is 20 g/l.

according to Regulation (EC) No. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial and professional use only.
Safety data sheetPutty Pine