PRODUCT DATA SHEET
Temacryl AR 50 - Acrylic topcoat
|DESCRIPTION||A physically drying, one-component semi-gloss acrylic based topcoat.|
|PRODUCT FEATURES||Recommended for surfaces exposed to marine or industrial climates and mild chemical stress.|
|Recommended uses||Bridges, cranes, conveyors, harbour equipment and tank exteriors.|
|Features||High film build properties. Can be applied at low temperatures. Tolerates temperatures up to 80 ºC dry heat.|
|Colour Cards||RAL, NCS, SSG, BS, MONICOLOR NOVA and SYMPHONY colour cards. TEMASPEED tinting.|
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
|Thinner||1006 and 1053|
|Application method||By airless spray or brush.|
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
|Solids volume||40 ± 2 % volume (ISO 3233)
55 ± 2 % weight
|Density||1.1 - 1.3 kg / l depending on colour|
|Application conditions||All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below - 5 ºC during application and drying. Relative humidity should not exceed 85 %. The surface temperature of the steel should remain at least 3 ºC above the dew point.|
|Preparation||Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)|
|Priming||TEMANYL MS PRIMER, TEMASIL 90, TEMAZINC 77, TEMAZINC 88 and TEMAZINC 99.|
|Finishing||TEMACRYL AR 50.|
|Painting||By airless spray or brush. Mix the paint thoroughly before use. Depending on the application method the paint can be thinned 0 - 15 %. Airless spray nozzle tip 0.013" - 0.019" and pressure 120 -180 bar. Spray angle shall be chosen according to the shape of the object.|
|Cleaning of tools||Thinner 1006 or Thinner 1053.|
|EU VOC 2004/42/EC-limit value||The Volatile Organic Compounds amount is 540 g/litre of paint.
VOC of the paint (thinned 15 % by volume) is 590 g/l.
|HEALTH AND SAFETY LABELLING|
according to Regulation (EC) No. 1272/2008
|Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.|
|Safety data sheet||Temacryl AR 50|
|Thinner safety data sheet||Temacryl AR 50|