PRODUCT DATA SHEET
Temal 400 - Silicone paint
|DESCRIPTION||A heat-resistant silicone paint.|
|PRODUCT FEATURES||Recommended for exteriors of steel structures exposed to high temperatures.|
|Recommended uses||Suitable for fireplace doors, flues, exhaust pipes, sauna stoves and other hot metal surfaces indoors and outdoors.|
|Features||Resistant to temperatures up to + 400 ºC dry heat on steel surfaces.|
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
|Application method||By airless spray (airmix system is recommended) or conventional spray or by brush.|
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
|Solids volume||19 ± 2 % volume (ISO 3233)
34 ± 2 % weight
|Density||1.1 kg / l|
|Product code||006 7683|
|Application conditions||All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below + 10 ºC during application. Relative humidity should not exceed 80 %. The surface temperature of steel should remain at least 3 ºC above the dew point.|
|Preparation||Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4)
Steel surfaces: Blast clean to grade Sa2½. (ISO 8501-1) If blast cleaning is not possible, phosphating is recommended for cold rolled steel to improve adhesion.
Zinc silicate surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)
|Painting||By airless spray (airmix system is recommended) or conventional spray or by brush. Mix the paint thoroughly before use. Depending on the application method the paint can be thinned 0 - 10 %. Airless spray nozzle tip 0.011" - 0.013" and nozzle pressure 120 - 160 bar. Spray angle shall be chosen according to the shape of the object.|
|Cleaning of tools||Thinner 1031.|
|EU VOC 2004/42/EC-limit value||The Volatile Organic Compounds amount is 700 g/litre of paint.
VOC of the paint (thinned 10 % by volume) is 715 g/l.
For industrial and professional use only.
|HEALTH AND SAFETY LABELLING|
according to Regulation (EC) No. 1272/2008
|Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj.|
|Safety data sheet||Temal 400|
|Thinner safety data sheet||Temal 400|