PRODUCT DATA SHEET
Temathane PC 50 - Polyurethane paint
|DESCRIPTION||A high-solids two-component, semi-gloss polyurethane paint, hardener aliphatic isocyanate.|
|PRODUCT FEATURES||Used as a semi-gloss topcoat for epoxy systems exposed to weathering.|
|Recommended uses||Recommended for painting of storage tank exteriors, steel buildings and other steelwork.|
|Features||Excellent weathering and abrasion resistance. A durable, easy to clean and non-chalking topcoat with good gloss and colour retention.|
|Colour Cards||RAL, NCS, SSG, BS, MONICOLOR NOVA and SYMPHONY colour cards. TEMASPEED Premium tinting.|
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
|Thinner||1048, 1067 and 1061|
|Mixing ratio||Base 5 parts by volume 419-series
Hardener 1 part by volume 008 7690 or 008 7590
|Application method||By airless or conventional spray.|
|Pot-life (+23°C)||1½ hours|
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
|Solids volume||65 ± 2 % volume (ISO 3233)
76 ± 2 % weight
|Density||1.3 ± 0.1 kg / l (mixed)|
|Application conditions||All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below + 5 ºC during application or drying. Relative humidity should not exceed 80 %. The surface temperature of the steel should remain at least 3 ºC above the dew point.|
|Preparation||Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)|
|Priming||Temacoat GPL-S Primer, Temacoat GF Primer, Temacoat HB Primer, Temabond, Temacoat RM 40, Temacoat SPA, Temadur 20, Temadur Primer, Temaprime GF, Fontecoat EP Primer and Fontecryl 10.|
|Finishing||Temathane and Temadur.|
|Painting||By airless or conventional spray. In order to obtain an even, non-porous finish, spray a misty coat: first a thin layer, then let the solvents evaporate for 5 - 30 minutes and then apply the full coat. Depending on the application method and the termperature of the components (base, hardener, thinner) the paint can be thinned 0 - 15 %. Airless spray nozzle tip 0.011" - 0.013" and nozzle pressure 120 - 160 bar. Spray angle shall be chosen according to the shape of the object.|
|Mixing of components||First stir base and hardener separately. The correct proportions of base and hardener must be mixed thoroughly before use. Use Temaspeed Squirrel Mixer for mixing.|
|Cleaning of tools||Thinner 1048, 1067 or 1061.|
|EU VOC 2004/42/EC-limit value||The Volatile Organic Compounds amount is 330 g/litre of paint.
VOC content in paint (thinned 15 % by volume) is 410 g/l.
For industrial and professional use only.
|HEALTH AND SAFETY LABELLING|
according to Regulation (EC) No. 1272/2008
|Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Coatings Oyj.|
|Safety data sheet||Temathane PC 50|
|Thinner safety data sheet||Temathane PC 50|
|Hardener safety data sheet||Temathane PC 50|