Easy-to-apply, physically drying acrylic paint
Temacryl AR 50A one-component, physically drying, semi-gloss, acrylic-based topcoat for e.g. bridges, cranes, conveyors, harbour equipment and tank exteriors.
High film-building properties
Temacryl AR 50 is a one-component acrylic based paint with hign film-building properties. It can be easily apply up to 175 µm wet film thickness without any sagging.
Can be applied at low temperatures
Temacryl AR 50 can be used even in - 5 ºC. The topcoat also withstands temperatures up to +80°C dry heat.
Temacryl AR 50 is used for
Do you need more information? Please contact our technical staff to get more information or advice >>
PRODUCT DATA SHEET
Temacryl AR 50 - Acrylic topcoat
|DESCRIPTION||A physically drying, one-component semi-gloss acrylic based topcoat.|
|PRODUCT FEATURES||Recommended for surfaces exposed to marine or industrial climates and mild chemical stress.|
|Recommended uses||Bridges, cranes, conveyors, harbour equipment and tank exteriors.|
|Features||High film build properties. Can be applied at low temperatures. Tolerates temperatures up to 80 ºC dry heat.|
|Colour Cards||RAL, NCS, SSG, BS, MONICOLOR NOVA and SYMPHONY colour cards. TEMASPEED tinting.|
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
|Thinner||1006 and 1053|
|Application method||By airless spray or brush.|
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
|Solids volume||40 ± 2 % volume (ISO 3233)
55 ± 2 % weight
|Density||1.1 - 1.3 kg / l depending on colour|
|Application conditions||All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below - 5 ºC during application and drying. Relative humidity should not exceed 85 %. The surface temperature of the steel should remain at least 3 ºC above the dew point.|
|Preparation||Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)|
|Priming||TEMANYL MS PRIMER, TEMASIL 90, TEMAZINC 77, TEMAZINC 88 and TEMAZINC 99.|
|Finishing||TEMACRYL AR 50.|
|Painting||By airless spray or brush. Mix the paint thoroughly before use. Depending on the application method the paint can be thinned 0 - 15 %. Airless spray nozzle tip 0.013" - 0.019" and pressure 120 -180 bar. Spray angle shall be chosen according to the shape of the object.|
|Cleaning of tools||Thinner 1006 or Thinner 1053.|
|EU VOC 2004/42/EC-limit value||The Volatile Organic Compounds amount is 540 g/litre of paint.
VOC of the paint (thinned 15 % by volume) is 590 g/l.
|HEALTH AND SAFETY LABELLING|
according to Regulation (EC) No. 1272/2008
|Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.|
|Safety data sheet||Temacryl AR 50|
|Thinner safety data sheet||Temacryl AR 50|