Introduction
Systems
Working instructions
Product data sheet
Colors
Paint calculator
Safety Data Sheets
 

Temalac FD 80

A fast-drying, one-component, glossy alkyd topcoat for different types of machinery, equipment and frameworks. 

The paint is solvent-borne
The coverage of the paint on rough surfaces
7,4
m2/l
The coverage of the paint on smooth surfaces
11,1
m2/l

Good gloss and color retention

Temalac FD 80 is a glossy alkyd topcoat with good gloss and color retention when exposed to weathering.

Long record list

Temalac FD 80 is widely used for different kind of machinery, equipment and steel construction in paint shops and on-site. Can be applied with electrostatic spraying.




Paint and coating systems for metal industries


PRODUCT DATA SHEET
23.06.2016
(Previous date 02.01.2006)

Temalac FD 80 - Alkyd topcoat

 
Temalac FD 80
DESCRIPTION A fast-drying, one-component glossy alkyd topcoat.
PRODUCT FEATURES
Recommended uses Recommended for steel structures, service platforms and different types of machinery and equipment.

TECHNICAL DATA
Colour Cards RAL, NCS, SSG, BS, MONICOLOR NOVA and SYMPHONY colour cards. TEMASPEED tinting.
Gloss groups Gloss
Coverage

Recommended film thicknesses

Theoretical coverage

dry

wet

 

40µm

90µm

11.1 m2/l

60µm

135µm

7.4 m2/l


Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Thinner 1006 and 1053
Drying times

DFT 40µm

+10ºC

+23ºC

+35ºC

Dust dry, after

40 min

15 min

10 min

Touch dry, after

3 h

1½ h

1 h

Recoatable, after

12 d

6 d

4 d

Recoatable, "wet-on-wet", after

1–4 h

½–2 h

30 min


Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.

Solids volume 45 ± 2 % volume (ISO 3233)
60 ± 2 % weight
Density 1.0 - 1.2 kg / l depending on color
Product code 180-series

APPLICATION DETAILS
Application conditions All surfaces must be clean, dry and free from contamination. The temperature of the ambient air, surface and paint should not fall below +5ºC during application and drying. Relative humidity of the air should not exceed 80% during application and drying. The surface temperature of steel should remain at least 3°C above the dew point. Good ventilation and sufficient air movement is required in confined areas during application and drying.
Preparation Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)
Priming Temaprime EE, Temaprime EUR, Temaprime GF, Temaprime ML and Fontecryl 10.
Finishing Temalac FD 80.
Painting Stir the product carefully before use.

For airless spraying, the product is thinned approximately 15–20% to the viscosity
30–40s (DIN4). Recommended nozzle tip is 0.011"–0.015" and pressure 120–180 bar. Spray angle shall be chosen according to the shape of the object.

For conventional spraying, the product is thinned approximately 20–30% to the viscosity 20–25s (DIN4). Recommended nozzle tip is 1.4–1.8 mm and pressure 3–4 bar.

"Wet-on-wet" spraying technique is recommended.
Cleaning of tools Thinner 1006.
EU VOC 2004/42/EC-limit value The Volatile Organic Compounds amount is 480 g/litre of paint.
Maximum VOC content in ready to use paint (thinned 30% by volume) is 570 g/l.


HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj.
Safety data sheetTemalac FD 80
Thinner safety data sheetTemalac FD 80
 
-


Back

Counter for metal coatings

Tikkurila offers wide range of paints and coatings for metal surfaces for different conditions, applications and needs. Tikkurila cost comparison program calculates costs and helps to find the best solution for your project.

VOC counter for metal coatings

Tikkurila VOC calculation program is based on VOC Directive 1999/13/EC valid in the whole EC area, which is aimed to reduce VOC emissions in different industrial activities. The calculation program is meant to be used as a preliminary mapping of solvent emissions.