Introduction
Systems
Working instructions
Product data sheet
Colors
Paint calculator
Safety Data Sheets
 

Temaline EPL 100

A two-component epoxy-phenolic paint, that mostly used for interior surfaces of tanks.

The paint is solvent-borne
The coverage of the paint on rough surfaces
5.0
m2/l
The coverage of the paint on smooth surfaces
7.7
m2/l

Suitable for water immersion up to +90°C

Temaline EPL 100 resistants to dilute solutions of non-oxidizing acids, alkali, salts, fuels and chemicals, see separate table. The paint is also suitable for immersion in hot water up to +90ºC.

Withstands dry heat up to +150°C

Due to phenolic resin Temaline EPL 100 withstands well dry heat.

Resistant to wide range of fuels

Ask for separate table to check chemical resistance of Temaline EPL 100.


Temaline EPL 100 is mainly used for




Paint and coating systems for metal industries


PRODUCT DATA SHEET
01.12.2017
(Previous date 04.10.2013)

Temaline EPL 100 - Epoxy-phenolic paint

 
Temaline EPL 100
DESCRIPTION A two-component chemical resistant epoxy-phenolic paint.
PRODUCT FEATURES •    High temperature resistant. Withstands dry heat up to +150ºC, but discolouration possible. Suitable for immersion of hot water between +65ºC–90ºC.
•    Due to binder type has especially good resistance towards many chemicals including light crude oil distillates like gasoline, diesel and kerosene. Resistance to fuels and chemicals are listed in the separate chemical resistance table.
•    Resistant to dilute solutions of non-oxidizing acids, alkali and salts in immersion.
•    As a CE marked product Temaline EPL 100 is suitable for concrete surfaces.
Recommended uses -

TECHNICAL DATA
Colour Range White (app. RAL 9010), beige (RAL1015) and light grey (RAL 7032 and 7044).
Gloss groups Semi-gloss
Coverage

Recommended film thicknesses

Theoretical coverage

dry

wet

 

100µm

130µm

7.7 m2/l

150µm

200µm

5.0 m2/l


Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Thinner 1031
Mixing ratio Base 5 parts by volume Temaline EPL 100
Hardener 1 part by volume 008 5612


Pot-life (+23°C) 1 hour.
Drying times

DFT 125µm

+10ºC

+23ºC

+35ºC

Dust dry, after

12h

4h

2h

Touch dry, after

24h

7h

5h

Recoatable, after

30h

10h

8h

Recoatable, max. without sanding

3d

48h

24h


Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume 72 ± 2 % (ISO 3233).
83 ± 2 %
Density 1.45 kg / litre (mixed).

APPLICATION DETAILS
Application conditions All surfaces must be clean, dry and free from contamination. The temperature of the ambient air, surface and paint should not fall below +10ºC during application and drying. Relative humidity of the air should not exceed 80% during application and drying. The surface temperature of steel should remain at least 3°C above the dew point. Good ventilation and sufficient air movement is required in confined areas during application and drying.
Preparation Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4)

Steel surfaces: Blast clean to grade Sa2½ (ISO 8501-1). The surface profile must be minimum medium (G). (ISO 8503-2)
Finishing Temaline EPL 100.
Priming Temaline EPL 100.
Painting For airless spraying, the product is thinned approximately 0–5%. Recommended nozzle tip is 0.015"–0.019” and 160–200 bar. Spray angle shall be chosen according to the shape of the object.
Mixing of components First stir base and hardener separately. The correct proportions of base and hardener must be mixed thoroughly before use. Use power mixer for mixing. Insufficient mixing or incorrect mixing ratio will result in uneven drying of the surface and weaken the properties of the coating.
Cleaning of tools Thinner 1031.
EU VOC 2004/42/EC-limit value The Volatile Organic Compounds amount is 240 g/litre of paint mixture.
VOC content of the paint mixture thinned 5% by volume is 270 g/l.

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial and professional use only.
Safety data sheetTemaline EPL 100
Thinner safety data sheetTemaline EPL 100
Hardener safety data sheetTemaline EPL 100

DECLARATION OF PERFORMANCE Declaration of Perfomance_Temaline_EPL_100
 
-


CE
EN 1504-2 The European harmonized productstandard EN 1504-2:2004 defines the requirements for surface protection systems for concrete.

This product is tested and CE-labelled in accordance with the tables 1d, 1f and 1g in the
appendix ZA.
CE logo
0809
Tikkurila Oyj
Kuninkaalantie 1
FI-01301 VANTAA
17
0809-CPD-0773
EN 1504-2:2004
Coating
Abrasion resistance
< 3000 mg
Resistance to severe chemical attack
Class II
Adhesion strength by pull off test
≥ 2,0 N/mm²
Release of dangerous substances
NPD
Permeability to CO2
CO2sD > 50 m
Water absorption
w < 0,1 kg/m²∙h0,5
Impact resistance
Class II
Permeability to water vapour
Class I, sD < 5 m
Reaction to fire
F(NPD)


Back

Counter for metal coatings

Tikkurila offers wide range of paints and coatings for metal surfaces for different conditions, applications and needs. Tikkurila cost comparison program calculates costs and helps to find the best solution for your project.

VOC counter for metal coatings

Tikkurila VOC calculation program is based on VOC Directive 1999/13/EC valid in the whole EC area, which is aimed to reduce VOC emissions in different industrial activities. The calculation program is meant to be used as a preliminary mapping of solvent emissions.