Rain, snow, salt, ....Screed that withstands everything
Industrial coatings for road construction
Tikkurila Temafloor 6 system is recommended
for areas where a non-slip finish resistant to
UV light, abrasion, load and salts is required.
Temafloor 6 is prepared by adding sand to the
Temafloor PU polyurethane coating and then topcoated with Temafloor PU-UV polyurethane coating, which has excellent UV resistance and withstands mechanical and chemical stress.
For more information see the brochure below.
The Temafloor 6 system is recommended for areas where a non-slip finish resistant to UV light, abrasion, pressure and salts is required. Typical applications include footbridges, bridges for vehicles, ramps and underground parking spaces.Temafloor 6
Coating systems for road construction
|System code||Priming 1-2 times||1st coat||2nd coat||Top lacquer, if needed|
|TC302||Temafloor AC102 Primer||Temafloor AC502||Temafloor AC602 Clear|
|Extremely fast-curing acrylic system for outdoor use, that withstands heavy mechanical stress. Curing is possible at low temperature.|
|Temafloor 6||Temafloor 400||Temafloor PU||Temafloor PU-UV|
Epoxy-polyurethane floor system for outside use with good weather and abrasion resistance. The elastic and anti-slip system withstands very high mechanical stress.
Product data sheet
Safety data sheet