Work instructions - Stained concrete floor
- The concrete floor should be prepared according to the instructions of the Data Sheet.
- Ensi Urethane Oil and the tinted Betolux Floor Pint are mixed separately in their cans. Then you can produce a mix in a desired mixing ratio, e.g. 1:6. By changing the Betolux shades and the mixing ratio, you can achieve different results.
- The ready-made mixture is thinned 10–20% using White Spirit 1050.
- The mixture is spread onto the floor using a thin rubber spatula. The mixture should be absorbed completely into the concrete after drying.
To avoid working day joints, the mixture is levelled using the "criss-cross" method. If necessary, treat the floor one more time using only Ensi Urethane Oil after 12–24 h.
Note! The system is suitable for dark colors only, tinted of C base, because light colors tend to turn yellow.