PRODUCT DATA SHEET
(Previous date 04.10.2013)
Temaline EPL 100 - Epoxy-phenolic paint
|DESCRIPTION||A two-component chemical resistant epoxy-phenolic paint.|
|PRODUCT FEATURES||• High temperature resistant. Withstands dry heat up to +150ºC, but discolouration possible. Suitable for immersion of hot water between +65ºC–90ºC.
• Due to binder type has especially good resistance towards many chemicals including light crude oil distillates like gasoline, diesel and kerosene. Resistance to fuels and chemicals are listed in the separate chemical resistance table.
• Resistant to dilute solutions of non-oxidizing acids, alkali and salts in immersion.
• As a CE marked product Temaline EPL 100 is suitable for concrete surfaces.
|Colour Range||White (app. RAL 9010), beige (RAL1015) and light grey (RAL 7032 and 7044).|
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
|Mixing ratio||Base 5 parts by volume Temaline EPL 100
Hardener 1 part by volume 008 5612
|Pot-life (+23°C)||1 hour.
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
|Solids volume||72 ± 2 % (ISO 3233).
83 ± 2 %
|Density||1.45 kg / litre (mixed).|
|Application conditions||All surfaces must be clean, dry and free from contamination. The temperature of the ambient air, surface and paint should not fall below +10ºC during application and drying. Relative humidity of the air should not exceed 80% during application and drying. The surface temperature of steel should remain at least 3°C above the dew point. Good ventilation and sufficient air movement is required in confined areas during application and drying.|
|Preparation||Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4)
Steel surfaces: Blast clean to grade Sa2½ (ISO 8501-1). The surface profile must be minimum medium (G). (ISO 8503-2)
|Finishing||Temaline EPL 100.|
|Priming||Temaline EPL 100.|
|Painting||For airless spraying, the product is thinned approximately 0–5%. Recommended nozzle tip is 0.015"–0.019” and 160–200 bar. Spray angle shall be chosen according to the shape of the object.|
|Mixing of components||First stir base and hardener separately. The correct proportions of base and hardener must be mixed thoroughly before use. Use power mixer for mixing. Insufficient mixing or incorrect mixing ratio will result in uneven drying of the surface and weaken the properties of the coating.|
|Cleaning of tools||Thinner 1031.|
|EU VOC 2004/42/EC-limit value||The Volatile Organic Compounds amount is 240 g/litre of paint mixture.
VOC content of the paint mixture thinned 5% by volume is 270 g/l.
|HEALTH AND SAFETY LABELLING|
according to Regulation (EC) No. 1272/2008
|Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial and professional use only.|
|Safety data sheet||Temaline EPL 100|
|Thinner safety data sheet||Temaline EPL 100|
|Hardener safety data sheet||Temaline EPL 100|
|DECLARATION OF PERFORMANCE||Declaration of Perfomance_Temaline_EPL_100|
|EN 1504-2 The European harmonized productstandard EN 1504-2:2004 defines the requirements for surface protection systems for concrete.
This product is tested and CE-labelled in accordance with the tables 1d, 1f and 1g in the